Model 6753i RP Phone Installation Guide11
Installation and Setup
Desk or Wall Installation
Install on the Desk
The desk installation for the 6753i RP phone consists of two legs that attach
to the back of the phone near the top corners. A total of four different
viewing angles allows users to personalize their phone viewing preference.
Attach each leg by inserting the tabs on the leg into the slots on the bottom
of the phone. There are three pair of leg slots on each corner of the phone;
each leg uses two pairs (1&2, or 2&3) giving two leg positions designating
different viewing angles. Furthermore, the legs can be reversed which offer
two additional viewing angles.
For a higher viewing angle, use the second and third slots from the top. For
a lower viewing angle, use the first and second slots from the top. Then
push the stand towards the phone until it snaps into place.
Three leg slot locations
for customizing the height
of the desk phone.
Four Different Viewing Angles
20.7 deg.
Incline Angle 23.3 deg.
Incline Angle 26.6 deg.
Incline Angle 30.9 deg.
Incline Angle