Univex 6753i Other Phone Features

Model 6753i RP Phone Installation Guide21

Other Phone Features

Other Phone Features

Pressing the volume button adjusts the receiver, headset,

speaker, and ringer volume.

• To adjust the ringer volume, leave the handset in the cradle and press

the volume button while there is no active call. There are 10

settings for the ringer including Off — the display will temporarily

indicate the current ringer volume setting.

• To adjust the handset volume, lift the handset and press the volume but-

ton while the handset is off hook. The handset will remain at

this volume until it is adjusted again.

• To adjust the headset volume, press the volume button

while the headset is activated (activate the headset by pressing Speaker/

Headset ; ensure headset audio mode is set). The headset will

remain at this volume until it is adjusted again.

• To adjust the speaker volume, press the volume button

while the speaker is activated (activate the speaker by pressing Speaker/

Headset ; ensure handsfree speakerphone audio mode is set). The

speaker will remain at this volume until it is adjusted again.

The speaker LED, beside the Speaker/Headset key , and the

Message Waiting Indicator (MWI) LED, on the top right of your phone,

provide visual indications of your phone’s status.

• When you make or answer a call, the Timer shows the elapsed time of

the call.

Speaker LED Status Description

ON solid Indicates a call is on Handsfree (speakerphone)

Slow Flash Indicates you are using the headset.

Rapid Flash Indicates the call is muted. Press to take the

call off mute.

MWI LED Status Description

Slow Flash Indicates you have a message(s).

Rapid Flash Indicates you have an incoming call.

Even Flash Indicates one or more calls are on hold.

Mute