CONNECTIONS

PABX Access

When using the VIP-800 with an electronic key system C. O. line position or PABX trunk port, a VIP-810 must be used to interface the telephone system with the network.

When using the VIP-800 with a PABX station port, a VIP-820 must be used to interface the telephone system with the network.

Operation

Press line key (electronic key system) or dial trunk access code (PABX) to connect to the paging speakers. Make announcement. The VIP-800 automatically disconnects from page when you hang up.

Page Port Access

When accessing the VIP-800 from a telephone system page port, either VOX or switch closure may be used to activate the unit.

Operation

Follow the telephone system manufacturer’s instructions for access to external paging. Make the announcement and hang up. The VIP-800 automatically disconnects from page.

The VIP-800 voice switching circuit is activated when the person making the page begins to speak. When the page is completed or the person stops speaking for more than two seconds, the paging circuit turns off. Other functions of the unit remain the same.

Background Music

Background music may be connected to the VIP- 800 when using either access method. Background music mutes when a page is made. Background music is specific to each unit.

Connect the output of a low level music source to the screw terminals marked “Music” on the input terminal strip on the VIP-800. Adjust music volume control on the music source to the desired level.

Volume Adjustments

The page volume is set by the speakers. Adjust speakers 1/3 - 1/2 volume initially, test and reset if necessary for correct page volume.

3