Vanguard Heating SBVRBN Connecting STOVE/ Burner System to GAS Supply, Checking GAS Connections

Models: SBVRBP SBVRBN

1 32
Download 32 pages 28.67 Kb
Page 14
Image 14

® SBVRBN AND SBVRBP

CAST IRON STOVE AND BURNER SYSTEM

CAST IRON STOVE AND B-VENT BURNER SYSTEM INSTALLATION

Continued

CONNECTING STOVE/ BURNER SYSTEM TO GAS SUPPLY

Installation Items Needed

5/16" hex socket wrench or nut-driver

sealant (resistant to propane/LP gas, not provided)

1.Open lower door panel.

2.Route flexible gas line (provided by installer) from equipment shutoff valve to burner system (see Figure 30). Route flexible gas supply line and attach to valve.

3.Check all gas connections for leaks. See Checking Gas Connections.

To Flare Fitting on

Control Valve

Equipment

Shutoff Valve

CHECKING GAS

CONNECTIONS

WARNING: Test all gas pip- ing and connections for leaks after installing or servicing. Cor- rect all leaks at once.

WARNING: Never use an open flame to check for a leak. Apply commercial leak test solution to all gas joints. Bubbles forming show a leak. Correct all leaks at once.

Pressure Testing Gas Supply Piping System

Test Pressures In Excess Of 1/2 PSIG (3.5 kPa)

1.

Disconnect appliance with its appliance

 

main gas valve (control valve) and

 

equipment shutoff valve from gas

 

supply piping systems. Pressures in

 

excess of 1/2 psig (3.5 kPa) will damage

 

burner system gas regulator.

2.

Cap off open end of gas pipe where

 

equipment shutoff valve was con-

 

nected.

3.

Pressurize supply piping system by ei-

 

ther opening propane/LP supply tank

 

valve for propane/LP gas burner sys-

Test Pressures Equal To or Less Than 1/2 PSIG (3.5 kPa)

1.Close equipment shutoff valve (see Figure 31).

2.Pressurize supply piping system by ei- ther opening propane/LP supply tank valve for propane/LP gas burner sys- tem or opening main gas valve located on or near gas meter for natural gas burner system, or using compressed air.

3.Check all joints from propane/LP sup- ply tank or gas meter to equipment shutoff valve (see Figure 32 for pro- pane/LP or Figure 33 for natural, page 15). Apply commercial leak test solu- tion to all gas joints. Bubbles forming show a leak. Correct all leaks at once.

Pressure Testing Burner System Gas Connections

1.

Open equipment shutoff valve (see Fig-

 

ure 31).

2.

Open propane/LP supply tank valve for

 

propane/LP burner system or main gas

 

valve located on or near gas meter for

 

natural gas burner system.

3.

Make sure control knob of burner sys-

 

tem is in the OFF position.

4.

Check all joints from equipment shutoff

 

valve to thermostat gas valve (see Fig-

 

ure 32 for propane/LP or Figure 33 for

Flexible Gas Line from Equipment Shutoff Valve Provided by Installer

To Gas Supply (Natural)

To External

tem or opening main gas valve located

on or near gas meter for natural gas

burner system, or using compressed air.

4. Check all joints of gas supply piping

system. Apply commercial leak test

solution to all gas joints. Bubbles form-

natural, page 15). Apply commercial

leak test solution to all gas joints.

Bubbles forming show a leak. Correct

all leaks at once.

5. Light burner system (see Lighting In-

structions, page 19). Check all other in-

Regulator (Propane/LP)

Figure 30 - Flexible Gas Line

ing show a leak. Correct all leaks at

once.

5. Reconnect burner system and equip-

ment shutoff valve to gas supply. Check

reconnected fittings for leaks.

ternal joints for leaks.

6. Turn off burner system (see To Turn Off

Gas to Appliance, page 19).

Open

Equipment

Shutoff

Valve

Closed

Figure 31 - Equipment Shutoff Valve

For more information, visit www.desatech.com

14

106707

Page 14
Image 14
Vanguard Heating SBVRBN, SBVRBP installation manual Connecting STOVE/ Burner System to GAS Supply, Checking GAS Connections

SBVRBP, SBVRBN specifications

Vanguard Heating has made significant strides in the heating industry with its innovative product line, including the SBVRBN and SBVRBP models. These heating solutions are designed for both residential and commercial applications, prioritizing efficiency, durability, and advanced technology.

The SBVRBN model stands out with its high performance output, making it ideal for areas needing rapid heating. This model utilizes state-of-the-art heating elements that ensure even warmth distribution, thereby eliminating cold spots and enhancing comfort. Additionally, its compact design allows for installation in various spaces without consuming excessive floor area.

One of the standout features of the SBVRBN model is its smart technology integration. Equipped with Wi-Fi connectivity, users can easily control the temperature remotely via a smartphone app, enabling them to preheat spaces before arriving home. This feature not only enhances convenience but also contributes to energy savings, as users can adjust heating schedules according to their lifestyle.

The SBVRBP variant focuses on energy efficiency, meeting rigorous standards that result in lower energy bills. It is equipped with advanced thermostatic controls that constantly monitor and adjust the heating output based on the ambient temperature. This technology ensures that the heating system operates only when necessary, reducing unnecessary energy consumption while maintaining comfort.

Both the SBVRBN and SBVRBP models feature durable construction with high-quality materials that are designed to withstand the test of time. Corrosion-resistant components and advanced insulation techniques contribute to longevity and consistent performance. Furthermore, their quiet operation is a significant benefit, making them suitable for environments where noise is a concern, such as offices or bedrooms.

Safety is a paramount consideration in Vanguard Heating's designs. Both models are equipped with multiple safety features, including overheating protection and automatic shut-off mechanisms. These enhancements provide peace of mind for users, knowing that their heating solutions operate safely and reliably.

In summary, Vanguard Heating’s SBVRBN and SBVRBP models represent a perfect blend of innovation, efficiency, and reliability. With smart technology, energy efficiency, durable construction, and safety features, these heating solutions are designed to meet the diverse needs of modern users, making them a compelling choice in the heating market.