Vanguard Heating SBVRBP, SBVRBN installation manual Venting Installation, Installation Precautions

Models: SBVRBP SBVRBN

1 32
Download 32 pages 28.67 Kb
Page 9
Image 9

OWNER’S MANUAL

CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY

Continued

6.Connect or reconnect gas supply, see Connecting Stove/Burner System to Gas Supply on page 14.

WARNING: A qualified in- staller or service person must connect burner system to gas supply. Follow all local codes.

VENTING INSTALLATION

WARNING: Read all instruc- tions completely and thoroughly before attempting installation. Failure to do so could result in serious injury, property damage,

The following actions will void the war- ranty on your venting system:

Installation of any damaged venting component

Unauthorized modification of the vent- ing system

Installation of any component part not manufactured or approved by DESA International

Installation other than as instructed by these instructions

Your Vanguard stove with B-vent burner system is approved for use with any listed gas vent. A listed gas vent is a factory made and listed system designed, and installed exclusively for removing products of com- bustion, excess air, and dilution air resulting from burning fuel gas. Metal vents, the most common type of vent, employ double wall construction enclosing an insulating air space. This air space both helps keep flue gases warm and reduce heat transferred to nearby combustibles. This appliance is equipped with a safety control system de- signed to protect against improper venting of combustion products.

Venting instruction contained in this manual may or may not appy to your area. Consult your local authority for re- quirement in your area.

Where the gas vent extends through ac- cessible spaces, it should be enclosed to avoid personal contact and damage. En- closure walls should have a fire rating equal to or greater than the floors through which the gas vent passes except in single or two-family dwellings.

Situate the gas vent in the structure so that it can be installed without cutting joists, sills, plates, or major load bearing partitions or members. It is also impor- tant to locate the base of the gas vent as near as possible to the heating appliance.

This burner system must be properly con- nected to a venting system. This burner system is equipped with a vent safety shutoff system.

Use only vents labeled "FOR EXTE- RIOR USE" above the roofline.

Consult the authority having jurisdiction to select the correct gas vent diameter. Avoid using a larger than necessary diameter.

or loss of life. Operation of im- properly installed and maintained venting system could result in serious injury, property damage, or loss of life.

NOTICE: Failure to follow these instructions will void the warranty.

INSTALLATION PRECAUTIONS

Consult local building codes before begin- ning the installation. Only a qualified ser- vice person should install venting system. The installer must follow these safety rules:

Wear gloves and safety glasses for protection

Use extreme caution when using ladders or when on roof tops

Be aware of electrical wiring locations in walls and ceilings

It is very important that the venting system maintain its balance between the combus- tion air intake and the flue gas exhaust. Certain limitations apply to vent configura- tions and must be strictly followed.

WARNING: This gasstove with burner system and vent assembly must be vented directly to the out- side. The venting system must NEVER be attached to a chimney serving a separate solid fuel burn- ing appliance.

TYPE B-VENT INSTALLATION (Listed B-0 or Greater)

Before beginning installation be sure that the overall height and gas vent size conform to building code requirements. Gas vents ex- tending through pitched roofs can extend a minimum height of at least 600 mm (2') higher than any obstruction within 3m (10'). Gas vents extending through flat roofs are required to extend at least 600 mm (2') above the roof and at least 600 mm (2') higher than any portion of the building or adjoining build-

Round Top

Storm Collar

Flashing

Firestop

Spacer

Enclosure

Wall

Gas Vent Length

Support

Plate

Adjustable

Length

Roof Suport

25mm (1") Clearance to Combustible Material

Keep Electrical Wires and Building Insulation Away from Gas Vent and Out of the Required Air Space

25mm (1") Clearance to Combustibles

ing within 3m (10') of the gas vent.

Figure 21 - Typical B-Vent Installation

Continued

106707

9

For more information, visit www.desatech.com

Page 9
Image 9
Vanguard Heating SBVRBP Venting Installation, Installation Precautions, Type B-VENT Installation Listed B-0 or Greater

SBVRBP, SBVRBN specifications

Vanguard Heating has made significant strides in the heating industry with its innovative product line, including the SBVRBN and SBVRBP models. These heating solutions are designed for both residential and commercial applications, prioritizing efficiency, durability, and advanced technology.

The SBVRBN model stands out with its high performance output, making it ideal for areas needing rapid heating. This model utilizes state-of-the-art heating elements that ensure even warmth distribution, thereby eliminating cold spots and enhancing comfort. Additionally, its compact design allows for installation in various spaces without consuming excessive floor area.

One of the standout features of the SBVRBN model is its smart technology integration. Equipped with Wi-Fi connectivity, users can easily control the temperature remotely via a smartphone app, enabling them to preheat spaces before arriving home. This feature not only enhances convenience but also contributes to energy savings, as users can adjust heating schedules according to their lifestyle.

The SBVRBP variant focuses on energy efficiency, meeting rigorous standards that result in lower energy bills. It is equipped with advanced thermostatic controls that constantly monitor and adjust the heating output based on the ambient temperature. This technology ensures that the heating system operates only when necessary, reducing unnecessary energy consumption while maintaining comfort.

Both the SBVRBN and SBVRBP models feature durable construction with high-quality materials that are designed to withstand the test of time. Corrosion-resistant components and advanced insulation techniques contribute to longevity and consistent performance. Furthermore, their quiet operation is a significant benefit, making them suitable for environments where noise is a concern, such as offices or bedrooms.

Safety is a paramount consideration in Vanguard Heating's designs. Both models are equipped with multiple safety features, including overheating protection and automatic shut-off mechanisms. These enhancements provide peace of mind for users, knowing that their heating solutions operate safely and reliably.

In summary, Vanguard Heating’s SBVRBN and SBVRBP models represent a perfect blend of innovation, efficiency, and reliability. With smart technology, energy efficiency, durable construction, and safety features, these heating solutions are designed to meet the diverse needs of modern users, making them a compelling choice in the heating market.