![](/images/new-backgrounds/1080036/8003625x1.webp)
5.2.NexStar 2 External 5.25” IDE Enclosure:
5.2.1.Hardware Installation:
Preparing the 5.25” device:
1)Set the jumpers on the device to MASTER (if applicable). Please refer to the documentation included with your 5.25” device for information on how to accomplish this.
2)Place the plastic mounting brackets on the 5.25” device as pictured below and screw it in place. (note: Each bracket is labeled with either an R or L The bracket with an R on it belongs on the RIGHT side of the device with the front of the drive facing you. The bracket with an L on it belongs on the LEFT side.)
“R” Mounting Bracket
Installation: NexStar 2 External 5.25” IDE Enclosure | 11 |