6)Follow the directions on the installation page. Please note, you will need your Windows 98SE Installation CD when installing the drivers.
7)Repeat the steps listed under “Connecting the NexStar 2 to your computer.”
Note: Microsoft has declared that it will extend support for Windows 98 through June 2006. However, some of the information or links on the Windows 98 support page may be outdated. Vantec is not responsible for any information, or lack thereof, on Microsoft’s Windows 98 support page.
Mac OS 9.0 or later - (NST-525U2, NST-525UF):
1)No drivers are necessary when using Windows ME/XP/2000. If the device does not appear under My Computer, you may need to install drivers for the 5.25” device (not NexStar 2). Please refer to the 5.25” device’s instructions on how to install its drivers.
Note: If you are using Toaster as your CD recorder software in Mac OS 9.0 or 9.2, you must install the USB 2.0 extension driver for Toaster. Please check http://www.roxio.com for more information.
Mac OS 8.6 - (NST-355U2, NST-355UF):
1)Unplug the NexStar 2 if you currently have it connected.
2)USB Mass Storage Support 1.3.5 must be installed on your system. If it is not, you can download the USB Mass Storage Support 1.3.5 from the Apple Software Updates website: http://www.apple.com/support
3)Follow the direction associated with the USB Mass Storage Support driver to install
4)Repeat the steps listed under “Connecting the NexStar 2 to your computer.”
Installation: NexStar 2 External 5.25” IDE Enclosure | 15 |
