Vax
Vax Careline 0870 606 1248
Secure by aligning the three (3) tabs in the base slots.
SLOTS
TABS |
Fig.6/8
Replace all three (3) screws to secure nozzle guard (see Fig.6/9).
7. General Maintenance
WARNING: To reduce the risk of injury from moving ! parts, unplug before servicing.
Debris removal - hose:
Check to see if dirt container is full; empty if needed
Plug cleaner in and check to see if there is any suction at end of hose. If there is suction at end of hose, move on to debris removal section below. If there is no suction at the end of the hose, follow these steps:
1Remove the dirt container (see section 5) and check dirt container inlet located on cleaner (Fig.7/1).
Fig.6/9
Fig.7/1
Debris removal - nozzle guard:
Remove nozzle guard (Fig.7/2) by removing three (3) screws. Remove obstruction.