Vax
www.vax.co.uk
3. How to Assemble
Handle Assembly: Tool required: Phillips screwdriver
Detach dirt container from back panel of cleaner by pressing dirt container release button and tilting forward.
Fig.3/1
Slide handle through top of back panel. Insert carry handle through holes in back panel (see Fig.3/2).
Fig.3/2
Fig.3/4
Secure Back Hose:
Wrap hose around back of hose caddy. Push hose wand down into the right side of cleaner and push the handle flat against the cleaner (Fig.3/5).
Fig.3/5
Tool Storage:
Insert one (1) screw through front of cleaner to secure handle. Secure carry handle with two (2) 1” screws through front of cleaner (see Fig.3/3).
Attach tools: (a) Slide the dust brush onto post on the lower tool caddy with the bristles facing out. (b) Clip Turbo Tool into the caddy on the front of the handle. (c) Slide the extension tube / crevice tool into the round slot on the left side of the cleaner (Fig.3/6).
a
BACK
Fig.3/3 | Fig.3/6 |
b | c |
FRONT | SIDE |