Vax
Vax Careline 0870 606 1248
Pull out and wipe with a damp cloth to clean (Fig.5/12).
Regular Maintenance
Each time the dirt container is emptied, the filter should be cleaned. Tap the filter firmly against the inside of a dustbin until the dirt stops falling from the filter.
The filter will be discoloured after use, but this will not affect the filter’s performance.
Do not brush the filter.
The cleaning instructions may vary depending on the dirt conditions. In some cases, more or less cleaning of the filter may be required.
Fig.5/12
Dry and return the air directors to the dirt container. Rotate 1/4 turn clockwise to lock in place (Fig.5/13).
Fig.5/13
Replace dirt container:
Return dirt container to cleaner. Align slot on bottom of dirt container with tab on cleaner. Push to snap into place (Fig.5/14).
Fig.5/14
6.Belt or Brushbar: Removal and Replacement
Tool required: Phillips screwdriver
WARNING: To reduce the risk of injury from moving ! parts, unplug cleaner before changing belt or
brushbar.
To remove belt:
Lay cleaner flat and flip cleaner to expose nozzle base. Base should lay flat and face up. The remove nozzle guard, use Phillips screwdriver to remove the three (3) screws. Arrows show location of screws (Fig.6/1).
Fig.6/1
Pull and lift nozzle guard off (Fig.6/2).
