Vax V-042, V-041 instruction manual To Replace the Belt or Brushbar

Vax V-041/2 9th.qxd 2/23/05 12:34 PM Page 8

Rotating Brushbar: Removal & Replacement

2. Pull and lift off the nozzle guard (Fig.7/2).

Fig.7/2

3.Lift and remove the brushbar. Dispose of the old belt (Fig.7/3).

Fig.7/3

3.With the new belt in place, pull and slide the brushbar into the nozzle, making sure that the end caps are in the correct orientation (Fig.7/6A). Rotate the brushbar manually to make sure belt is properly aligned (Fig.7/6).

A

Fig.7/6

4. Re-attach the nozzle guard (Fig.7/7).

To Replace the Belt or Brushbar

1. Slide the belt on to the motorshaft (Fig.7/4).

Fig.7/4

2.Place the new belt in the area of the brushbar without bristles (Fig.7/5).

Fig.7/5

Fig.7/7

5.Secure by aligning the three (3) tabs in the base slots (Fig.7/8).

Fig.7/8

6.Replace all three (3) screws to secure the nozzle guard (Fig.7/9).

Fig.7/9

8