STARTING UP
1,
Holding the power cord by the plug, pull the cord out completely. Red tag will indicate the end of the cord. Plug into the outlet.
BRUSH VACUUMWNG
2,/3./
x_ |
|
|
|
|
|
For easier | handling | while | Switch | the upright vacuum |
|
vacuuming, | hook the | power | cleaner on or off by pressing the | ||
on/off | switch. |
| |||
cord onto the power cord |
| ||||
|
|
| |||
hook. |
|
|
|
|
|
|
|
|
| BRUSHROLL | RESET |
Brush Vacuuming on carpeted floors:
1
Tilt the upright vacuum cleaner beck before you start vacuuming. At the same time, use your foot to press the nozzle down onto the carpet.
•The brushroll is switched on or off using the brushroll on/off switch (Diagram 2). Switch brushroll on for carpeted floors.
•The rotating brushroll loosens deeply embedded dirt and brings it to the surface.
Vacuuming on smooth surfaces:
•Switch brushroll off to obtain the best results when vacuuming smooth barefloor surfaces.
RESET BUTTON
If something becomes lodged and brushroll shuts off, turn cleaner off and remove obstruction. Once the
problem has been fixed, the vacuum cleaner can be switched back on
again after approximately 2 minutes by pressing the reset button.
7
