VACLJUM_NG WiTH ACCESSORIES
•Bring the upright vacuum cleaner into its vertical locking position. The brushroll switches off automatically in this position, thus preventing any damage to the carpet while cleaning with hose or tools.
•To switch the upright vacuum cleaner on again when you resume vacuuming, tilt it back. The brushrotf switches on again automatically.
ly3.
Press the release button to release the cleaning wand.The cleaning wand with built- in brush can be used for cleaning surfaces.
4.
UPHOLSTERY
TOOL
\
To access tools, rock upholstery tool away from cleaner. To remove tools,
grasp tool and pull up and out of accessory clip.
While pressing the hose release | Straighten the hose and hook | the hose clip |
button, pull out the suction hose | into the fastening ring to prevent the upright | |
| ||
to release from cleaning wand. | vacuum cleaner from toppling | over during use. |
| ||
5.6.f
Then | attach the accessory to the | The | rotating | upholstery tool may be turned through 360 ° to allow |
suction | hose. | vacuuming Jn poorly accessible areas such as corners, edges, stairs | ||
|
| |||
|
| and | vertical | surfaces. |
