Manuals / Vector / Lawn and Garden / Portable Generator

Vector VEC012B owner manual Preparing to Charge, Charger Location, DC Connection Precautions

Models: VEC012B

1 16
Download 16 pages 49.87 Kb
Page 6
Image 6

PREPARING TO CHARGE

1.Determine voltage of battery by referring to car owner's manual.

2.If it is necessary to remove battery from vehicle to charge, or to clean terminals, always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.

3.Clean battery terminals. Be careful to keep corrosion from coming in contact with eyes.

4.Add distilled water in each cell until battery acid reaches level specified by bat- tery manufacturer. This helps purge excessive gas from cells. Do not overfill. For a battery without cell caps (maintenance free), carefully follow manufacturer's charging instructions.

5.Study all battery manufacturers' specific precautions such as removing or not removing cell caps while charging and recommended rates of charge.

6.Area around battery should be well ventilated while battery is being charged.

7.Make sure the initial charging rate does not exceed battery manufacturers requirement.

CHARGER LOCATION

1.Locate charger as far away from battery as cables permit.

2.NEVER place charger directly above battery being charged; gases from battery will corrode and damage charger.

3.NEVER allow battery acid to drip on charger when reading specific gravity or fill- ing battery.

4.NEVER operate charger in a closed-in area or restrict ventilation in any way.

5.Marine batteries must be removed and charged on shore.

6.Do not set a battery on top of charger.

DC CONNECTION PRECAUTIONS

1.Connect and disconnect DC output clamps only after removing AC cord from electric outlet.

2.Never allow clamps to touch each other.

3.Attach clamps to battery posts and check for secure connection. This will hold clamps securely on terminals and helps to reduce risk of sparking.

FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN VEHICLE. A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE RISK OF A SPARK NEAR THE BATTERY:

1.Position AC and DC cords to reduce risk of damage by hood, door, or moving engine part.

2.Stay clear of fan blades, belts, pulleys, and other parts that can cause injury to persons.

3.Check polarity of battery posts. POSITIVE (POS, P, +) battery post usually has larger diameter than NEGATIVE (NEG, N,-) post.

4.Determine which post of battery is grounded (connected) to the chassis. If nega- tive post is grounded to chassis as in most vehicles), see (5). If positive post is grounded to the chassis, see (6).

5

Page 5 Page 7
Page 6
Image 6
Vector VEC012B owner manual Preparing to Charge, Charger Location, DC Connection Precautions
Page 5 Page 7

VEC012B specifications

The Vector VEC012B is a robust and versatile jump starter designed to provide reliable emergency power for a wide range of vehicles. This compact device stands out in the market with its impressive features, making it a favored choice for both casual users and automotive enthusiasts.

One of the key features of the VEC012B is its powerful Lithium-Ion battery. This advanced battery technology ensures a high energy density, enabling the jump starter to deliver a substantial amount of power while maintaining a lightweight profile. With a peak current of 1,500 amps, the VEC012B can easily jump-start vehicles with larger engines, including trucks and SUVs, making it suitable for various applications.

In addition to its jump-starting capabilities, the Vector VEC012B is equipped with multiple USB ports, allowing users to charge mobile devices, tablets, and other electronics on the go. This versatility is perfect for outdoor adventures, ensuring that users remain connected while on the road.

Safety is a top priority for the VEC012B, which comes with built-in protection features that prevent short circuits, overcharging, and reverse polarity connections. The clamp design is optimized for secure attachment to vehicle batteries, ensuring a safe and efficient jump-start experience.

The VEC012B also includes an integrated LED flashlight, providing added convenience during nighttime emergencies or in poorly lit conditions. The flashlight offers multiple modes, including a strobe function, which can be useful for signaling for assistance.

Durability is another strong point of the Vector VEC012B. Its rugged design is built to withstand harsh conditions, making it an ideal companion for off-road adventures or emergency situations. The compact size and included carry case enable easy transportation and storage, allowing users to keep the device handy in their vehicles without taking up much space.

Overall, the Vector VEC012B is an essential tool for anyone looking for a reliable jump starter. Its combination of high power output, multiple charging options, safety features, and portability makes it a standout product in the jump starter market, providing peace of mind for drivers everywhere. Whether for everyday use or emergency situations, the VEC012B is a must-have device for vehicle owners.