IMPORTANT:

Although this unit is delivered in a partially-charged state - you must fully charge it with the supplied 110/120 Volt AC charger for a full 24 hours before using it for the first time.

You can not overcharge the unit using the AC charger method.

CAUTIONS:

Caution statements advise against certain conditions and practices that may result in damage to vehicles, appliances and/or The START-IT Compact Jump-start System.

1)Use only the supplied cords/adapters for recharging this unit. Do not recharge for more than 3-4 hours maximum using 12 Volt DC method. Recharge unit after each use.

2)All On/Off switches should be in the OFF position when the unit is charging or not in use. Make sure all switches are in the OFF position before connection to a power source or load.

3)Never insert anything other than the supplied power/recharging cords or recommended appliance power/recharging cords into the 12 Volt DC charging/power socket on this unit. Do not use any accessory that is not recommended or provided by the manufacturer.

4)Do not use this unit to operate appliances that draw more than 15 amps.

5)This system is designed to be used only on vehicles with 12 Volt DC battery systems. Do not connect to a 6 Volt or 24 Volt battery system.

6)This system is not designed to be used as a replacement for a vehicular battery. Do not attempt to operate a vehicle that does not have a battery installed.

7)Vehicles that have on-board computerized systems may be damaged if vehicle battery is jump-started. Before jump-starting, read the vehicle’s owner’s manual to confirm that external-starting assistance is advised.

8)Excessive engine cranking can damage a vehicle’s starter motor. If the engine fails to start after the recommended number of attempts. Discontinue jumpstart procedures and look for other problems that may need to be corrected.

9)Although this unit contains a non-spillable battery, it is recommended that unit be kept upright during storage, use and recharging. To avoid possible damage that may shorten the unit’s working life, protect it from direct sunlight, direct heat and/or moisture.

10)Check unit periodically for wear and tear. Replace worn or defective parts immediately contact Vector customer service department at (954) 584-4446 or toll-free (954) 584-5504.

11)Do not attempt to jump-start a frozen battery.

12)Never submerge this unit in water.

13)All wires, cables and cords must be positioned so that they can not be tripped over or damaged by moving parts, by pinching or abraiding.

3

Page 2 Page 4
Page 3
Image 3
Vector VEC016 owner manual You can not overcharge the unit using the AC charger method
Page 2 Page 4

VEC016 specifications

The Vector VEC016 is a cutting-edge vehicle diagnostic tool designed for both professional mechanics and automotive enthusiasts. Renowned for its user-friendly interface and powerful features, the VEC016 brings advanced capabilities to the world of vehicle diagnostics, making it an indispensable tool in any workshop or garage.

One of the main features of the VEC016 is its ability to perform comprehensive vehicle scans. It is compatible with a wide range of vehicles, supporting various protocols and systems, including OBD-II, CAN, ISO9141, and KWP2000. This enables users to diagnose issues across multiple brands and models, ensuring that it remains relevant as automotive technology evolves.

The VEC016 is equipped with an intuitive touchscreen display that provides clear and concise information, making navigation simple and efficient. The tool can read and erase diagnostic trouble codes (DTCs) across engine, transmission, ABS, and airbag systems, making it versatile in addressing a variety of issues. The live data functionality allows users to view real-time information from the vehicle’s sensors, providing critical insights that can help diagnose recurring problems or fine-tune performance.

Another noteworthy technology featured in the VEC016 is its advanced graphical data representation. This feature allows mechanics to visualize data trends over time, making it easier to identify abnormalities and patterns that could indicate larger underlying issues. Additionally, the device supports freeze frame data, helping users understand the conditions that caused a specific diagnostic trouble code to trigger.

The VEC016 also includes features such as oil reset, EPB (electronic parking brake) reset, and SAS (steering angle sensor) calibration, which adds to its appeal for those involved in routine maintenance and calibration tasks. This makes the VEC016 an all-in-one diagnostic solution, eliminating the need for multiple tools.

With a robust build quality and rechargeable battery, the Vector VEC016 is designed for durability and convenience. Its portability allows mechanics to perform diagnostics on-site or in challenging environments, ensuring that assistance is always just a scan away.

Overall, the Vector VEC016 stands out as a powerful and versatile diagnostic tool, blending advanced technology with ease of use. Its array of features makes it an essential asset for anyone looking to maintain or repair modern vehicles effectively.
Top Page Image Contents