OPERATING TIPS

The Power Force 50™ should only be operated in locations that meet the following criteria:

DRY - Do not allow water or other liquids to come into contact with the inverter.

COOL - Ambient air temperature should be between -20°C and 40°C - ideally between 15°C and 25°C (60 - 80°F). Do not place the inverter on or near a heating vent or any piece of equipment which is generating heat above room temperature. Keep the inverter away from direct sunlight, if at all possible.

VENTILATED - Keep the area surrounding the Power Force 50™ clear to ensure free air circulation around the unit. Do not place items on or over the inverter during operation. The unit will shut down if the internal temperature exceeds 90°C. Restart the unit once it cools down sufficiently.

SAFE - Do not use the Power Force 50™ near flammable materials or in any locations that may accumulate flammable fumes or gases.

Rated Versus Actual Current Draw of Equipment

Most electrical tools, appliances, electronic devices and audio/visual equipment have labels that indicate the power consumption in amps or watts. Be sure that the power consumption of the item to be operated is below 50 watts. If the power consumption is rated in amps, simply multiply by the AC volts (110) to determine the wattage.

Resistive loads are the easiest for the Power Force 50™ to run; however, it will not run larger resistive loads (such as electric stoves and heaters) which require far more wattage than the Power Force 50™ can deliver on a continuous basis. Inductive loads (such as TVs and stereos) require more current to operate than do resistive loads of the same wattage rating. Induction motors, as well as some TVs, may require 2 to 6 times their wattage rating to start up. The most demanding in this category are those that start under load, such as compressors and pumps. Testing is the only definitive way to determine whether a specific load can be started and how long it can run. For safety reasons, the unit will simply shut down if it is overloaded. To restart the unit after a shutdown due to overloading, momentarily turn off the power to the unit.

Note: The Power Force 50™ will not operate appliances and equipment that generate heat, such as hair dryers, microwave ovens, and toasters.

NOTE: Vector™ recommends charging from a vehicle only while its engine is running, so as not to run down the vehicle’s battery. The ideal charging rate is 14.5-15.5 volts, which is nearly identical to the charging rate of most vehicle batteries.

OPERATION

Estimated run-times.

12 VOLT DC APPLIANCE

APPROX. RUNNING TIME

CELL PHONE,

 

FLORESCENT LIGHT

6-12 HOURS

RADIO, FAN, DEPTH FINDER

5 HOURS

CAMCORDER, VCR, SPOTLIGHT

2.5 HOURS

ELECTRIC TOOLS, BILGE PUMP

1 HOUR

INFLATOR/RAFT

50 MINUTES

AIR COMPRESSOR

25 MINUTES

 

 

110 VOLT AC APPLIANCE

APPROX. RUNNING TIME

 

 

50 WATT LAMP

40 MINUTES

LAPTOP / PRINTER

1.5 HOURS

DESK FAN

2.0 HOURS

STEREO/CD PLAYER

2.5 HOURS

CELLULAR PHONE, POWER TOOLS

5 TO 10 HOURS

& CAMCORDER CHARGERS

 

 

 

 

11

 

 

 

4

 

 

 

Page 4 Page 6
Page 5
Image 5
Vector VEC018 owner manual Operating Tips, Rated Versus Actual Current Draw of Equipment, Operation, Estimated run-times
Page 4 Page 6

VEC018 specifications

The Vector VEC018 is a state-of-the-art device specializing in advanced electric vehicle charging solutions. As electric vehicles (EVs) gain popularity, the demand for efficient, fast, and reliable charging systems has significantly increased. The VEC018 stands at the forefront of this trend, promising both innovation and performance.

One of the main features of the VEC018 is its rapid charging capability. It is designed to support various charging standards, including AC and DC, allowing for versatile use with many EV models. The device can deliver up to 22 kW with three-phase AC charging, making it one of the fastest AC chargers available. When using DC fast charging, the VEC018 can output up to 150 kW, enabling users to charge their vehicles in a fraction of the time compared to conventional chargers.

The VEC018 is equipped with smart technology that enhances the user experience. It features an intuitive touchscreen interface that provides real-time charging statistics, including power output, charging time, and energy consumed. This ensures that users have complete visibility into the charging process. Additionally, the device supports mobile app integration, allowing users to monitor and control the charging session remotely.

Safety is a primary concern for any EV charging solution, and the VEC018 does not disappoint. It incorporates multiple safety protocols, including overcurrent protection, short circuit protection, and temperature monitoring. These features protect both the charger and the vehicle, ensuring a safe and efficient charging experience. Moreover, the device is built to withstand harsh weather conditions, making it suitable for outdoor installations.

Another notable characteristic of the VEC018 is its compact and modular design. This allows for easy installation and scalability, making it an ideal choice for both residential and commercial applications. Whether it’s a single-unit installation at home or a comprehensive charging solution for a fleet of EVs, the VEC018 can be tailored to meet specific needs.

In summary, the Vector VEC018 is a cutting-edge electric vehicle charging solution characterized by its rapid charging capabilities, smart technology integration, robust safety features, and flexible design. As the transition to electric mobility accelerates, the VEC018 is poised to play a pivotal role in shaping the future of EV charging infrastructure. Whether used in public charging stations or private garages, it represents a significant advancement in the electric vehicle landscape.
Top Page Image Contents