Storage
•Ideal storage temperature range is
•Store the Pocket Generator™ in a cool, dry place with adequate ventilation for
•Avoid locations that are exposed to heating units, radiators, direct sunlight, or excessive humidity or dampness.
•To maximize useful life, fully charge the unit before storing.
•If storing at less than 50°F, recharge every six months; at
•Always make sure the unit is disconnected from charger before storing.
SPECIFICATIONS: Pocket Generator™
AC Output | 110 volts |
DC Output | 12 volts |
Fuse | 10 amps |
Battery | 12 volt 5 amp hour sealed lead acid, |
Inverter | 50 watts continuous/80 amps peak surge capacity |
Weight: | 4.60 lbs. |
Height: | 6.25” |
Depth: | 4.00” |
Width: | 7.50” |
Power Force 50™ Inverter
WARNING: Do not attempt to remove the inverter from the unit for any reason - it is
The Vector™ Power Force 50™ inverter supplied with the Pocket Generator™ is one in a series of the most advanced DC to AC inverters available today. With proper care and maintenance, it will deliver years of dependable service. For easy reference, see sections titled:
Introduction
How the Power Force 50™ Inverter Works
Power Source Requirements
Fuse Replacement
Operating Tips
Troubleshooting
Specifications
INTRODUCTION
The Power Force 50™ supplies
The Power Force 50™ is equipped with an ON/OFF switch and power/charging indicator light. The AC receptacle is fully marinized,
•electronic circuit protection that prevents damage due overloading or insufficient ventilation;
•automatic shutdown to prevent damage to vehicle’s battery.
Please read the following information carefully before use, to ensure reliable service and complete safety. Pay particular attention to the CAUTION and WARNING statements that are provided.
HOW THE Power Force 50™ INVERTER WORKS
The Power Force 50™ inverter is an electronic device that converts low voltage DC (direct current) electricity from a battery to standard
Principle Of Operation
The Power Force 50™ inverter converts power in two stages. The first stage is a
14.5volts DC. The second stage is the actual inverter stage that converts the high voltage DC into
The
Figure 1.
Vector™ Power Force 50 ™
Inverter - Principle of
Operation
7 |
|
|
| 8 |
|
|