IMPORTANT:
Always leave the thumb latch in the open position when storing unit.
6.3INFLATING OTHER ARTICLES (WITHOUT VALVE STEM)
Inflation of other items requires use of one of the adapters (nozzles).
1.Open the hatch and remove the nozzles noting their storage positions.
2.Insert appropriate adapter (e.g. needle) into connector (chuck) and close thumb latch.
3.Refer to Table III, Typical Inflation Times, for approximate filling pressure and time. Small items such as volleyballs, footballs, etc. inflate very rapidly.
4.Insert adapter (e.g. needle) into item to inflate to appropriate pressure.
5.Turn ON compressor switch - inflate to desired pressure or fullness (refer to paragraph 5.5).
6.Remove adapter from .
7.Turn off compressor switch.
6.4TYPICAL INFLATION TIMES
The following are approximate pressure and inflation times for various items.
WARNING:
Always follow tire manufacturers recommendations for pressure on item to be inflated.
Table III
VEHICLE AND TRAILER TIRES | INFLATION PRESSURE (PSI) | FILLING TIME |
|
| |
155/80R 13” | 26 | 2.5 min |
185/70R 14” | 30 | 4.5 min |
235/75R 15” | 30 | 6.5 min |
235/85R 16” | 50 | 16 min |
BICYCLE TIRES |
|
|
27” X 1” (racing) | 10 | 40 sec. |
Football | 13 | 24 sec. |
Basketball | 9 | 20 sec. |
Volleyball | 5 | 6 sec |
7.REPLACEMENT PARTS
For replacement parts (bulbs, batteries, fuses, etc.), contact Vector Customer Service: (954)
12
