Vector VEC021STC Specifications, Bulb Replacement, Battery Replacement, Battery Disposal

7.1BULB REPLACEMENT

Tools needed - small Phillips screwdriver.

1.Unscrew (counterclockwise) and remove two Phillips screws.

2.Remove the lens cover.

3.Remove the burned-out bulb.

4.Replace with a new bulb (12 Volt 0.2 amp Krypton bulb).

5.Snap the lens cover back into place.

6.Replace (clockwise) the screws and carefully tighten. Do not over tighten!

7.2BATTERY REPLACEMENT

It is recommended that the unit be returned to Vector Customer Service for battery replacement: Contact (954) 584-4446 or toll-free (866) 584-5504.

WARNING:

•Do not dispose of the battery in fire as this may result in an explosion

•Before disposing of the battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in injury or fire)

•Do not expose battery to fire or intense heat as it may explode

7.3BATTERY DISPOSAL:

This unit contains a maintenance-free, non-spillable, sealed lead-acid battery. This battery is fully recyclable and should be accepted at any location that accepts common automotive starter batteries. Examples of places that accept these batteries are: County or municipal recycling drop-off centers, scrap metal dealers and retailers who sell automotive replacement lead acid starter batteries. For more information on recycling this battery, call toll-free (877) 288-7722.

8.SPECIFICATIONS

Model	VEC021STC
Boost Ampere	400 Instantaneous Cranking Amps
Peak Ampere	1200 Amps
Battery Type	Sealed, high energy density, AGM, lead-acid,
rechargeable, maintenance-free, 12 volt DC, 19 Amp-hour
Bulb	PR type 12 Volt 0.2 Amp Krypton
Booster Cables	Heavy duty welding cable with
	400 Amp copper clamps
Accessory Socket	Self-Resetting Breaker 20 Amps
DC Charging Adapter	12 Volt DC
AC Charging Adapter	120 Volt AC (700mA, 12 Volt DC Output)
Reverse Polarity Detection	2 Volts (min)
HEIGHT	11.75 in. (29.8 cm)
DEPTH	8.25 in (21 cm)
WIDTH	11.625 in (29.5 cm)
WEIGHT	19.1 lb. (8.66 Kg)

13