![](/images/new-backgrounds/1255713/25571325x1.webp)
8.TROUBLESHOOTING GUIDE:
TABLE 1 - INVERTER POWER SWITCH TURNED ON
TROUBLE/ INDICATION | POSSIBLE CAUSE | SUGGESTED REMEDY |
No AC output – | DC input below 10 volts | Recharge or replace |
red LED lit |
| battery |
|
|
|
No AC output – | Excessive appliance | Reduce |
red LED lit | inverter to cool. Turn OFF, | |
| then turn ON |
|
|
|
|
No AC output – | Inverter fuses open | Contact technical Support |
Green LED not lit |
| toll free |
|
|
|
|
|
|
TROUBLE/ INDICATION | POSSIBLE CAUSE | SUGGESTED REMEDY |
|
|
|
Low battery alarm | Bad connection or wiring | Tighten all DC |
sounds continuously |
| connections |
Low battery | Low battery voltage | Recharge battery. |
alarm sounds |
| Remove load from |
|
| inverter while recharging |
|
| battery |
Motorized power tool | Excessive | If appliance does not start, |
| won’t start | then appliance is drawing |
|
| excessive wattage and will |
|
| not work with inverter |
Motorized power tool | Purely inductive load | Make the load not purely |
does not operate at |
| inductive. Operate an |
correct speed |
| incandescent lamp at |
|
| same time as motor |
Television/Radio | Snow in picture, buzz | Keep inverter and |
| interference in speaker | antenna distant from |
|
| each other. Use shielded |
|
| antenna cable. Connect |
|
| antenna to amplifier |
|
|
|
13