CONGRATULATIONS!
Congratulations on your purchase of a Velodyne subwoofer system. This system represents the
Caution!
Please observe the following precautions to insure safe and proper system operation.
Note: Do not leave unit in direct sunlight or use in high humidity environments!!!
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do not open speaker enclosure or amp chassis cover. Please observe all warnings on the equipment itself. There are no user serviceable parts inside. Please refer all service questions to your authorized Velodyne dealer or service representative.
Prior to Installation
Please unpack the system carefully. This unit is heavy. Use caution when lifting or moving to avoid injury. Remove all staples used to seal the carton as they can scratch the cabinet. Please save the carton and all packaging materials for future use. Packing this unit in any other carton may result in severe damage when shipping. Record the serial number in the space provided on the warranty card for future reference.
PRODUCT FEATURES
•8” (6.5” piston diameter) driver with 2.5”
•
•Adjustable (40 to 120 Hz)
•
•LFE Input
•
•Signal sensing auto turn on/off (defeatable)
•Variable volume control
•Selectable phase control (0° or 180°)
•Frequency response of 28 - 120 Hz
•Multiple staggered
•Driver Displacement Control circuit prevents over excursion and amp clipping
•Blue power indicator LED
•
•Oversized spider for linearity at high excursion
P
PREPARE FOR INSTALLATION
Your new Velodyne subwoofer provides for a number of installation options. Read all the installation information below in order to determine which installation option is best suited for your system. Remember to perform all installation procedures with system power turned off to prevent possible damage.
PLACEMENT
True subwoofers operate at extremely low frequencies which are primarily
Caution! This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture, such as evaporative coolers, humidifiers, etc. The power cord should be routed in such a way that it will not be walked on, pinched or compressed in any way that could result in damaging the insulation or wire.
2 |
| 3 |