Snapper 285Z manual Specifications, Engine, Transmissions, Dimensions, Chassis, Replacement Parts

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

Engine:			Transmissions:
27 HP Briggs & Stratton			Hydro-Gear
Make	Briggs & Stratton		Type	ZT-2800 (LH & RH)
Model	27 hp PRO Twin w/EFM		Hydraulic Fluid	20W-50 Conventional Detergent Motor Oil
Horsepower	27 @ 3500 rpm		Speeds	Forward: 0-6 MPH (0-9.66 km/h)
Displacement	44.0 Cu. in (724 cc)		@ Specified rpm	Reverse: 0-3 MPH (0-4.83 km/h)
Electrical System	12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity	64 Oz. (1.9 L) w/ Filter		Dimensions:
Chassis:			Overall Length	75” (191 cm)
			Overall Width	55” (140 cm)
Fuel Tank	Capacity: 3.0 Gallons (11.4 L)		Height	39” (99 cm)
Rear Wheels	Tire Size: 20 x 10.0-8		Weight (apx.)	600 lbs. (273 kg)
	Inflation Pressure: 15 psi (1,03 bar)
Front Wheels	Tire Size: 11 x 4.00-5
	Inflation Pressure: 25 psi (1,72 bar)
Replacement Parts		Reproduction
			Maintenance Items
Replacement parts are available from your authorized dealer.			Many c nvenient and helpful service and maintenance items
Always use genuine Service Parts.			are available from your authorized dealer. Some of these items
			include:
			Engine Oil		Tire Sealant
			To ch-Up Paint		Degrimer/Degreaser
			Grease G n Kit		Gas Stabilizer
			8 z. Grease Tube

Engine Power Rating Information: The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horse- power values are derived at 3600 RPM. Actual gross ngine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products which engines are placed and the

variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of factors includ- ing, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capaci- ty limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

800-935-2967

www.snapper.com