SPECIFICATIONS FOR THE DECO SATELLITES
Woofer: | 4” Magnetically shielded woofer 3.5” piston |
| diameter with cast aluminum basket, poly |
| coated fiber cone and rubber surround |
Tweeter: | 1” Silk dome tweeter .95” piston diameter |
| with shielded neodymium magnet and |
| ferrofluid cooling |
Crossover: | 18 dB/octave @ 2500 Hz |
Sensitivity: | 88 dB for 2.83 volts @ 1 meter |
Impedance: | 4 ohm nominal* |
| *Compatible with most 4/6/8 ohm receivers and amplifiers. |
| Check the owner’s manual supplied with your receiver for |
| more information. |
Protection: | Automatic resetting solid state “muting” device |
Frequency Response: | 110 Hz to 20 kHz |
Recommend Amplifier Power: | 25 watts to 150 watts |
Inputs: | Gold Plated Binding Posts |
| (Accepts bare wire or banana plugs) |
Warranty: | Five years |
Enclosure Dimensions (H,W,D): 8.0” x 5.5” x 6.0” | |
Weight (ea., unpacked): | 4.6 lbs [2.1kg] |
Specifications are those in effect at the time of printing. Velodyne Acoustics, Inc. reserves the right to change specifica- tions or appearance at anytime without notice.
The DECO 8 Home Theater System contains the following items:
a) 5 ea. DECO Satellites | b) 1 ea. DECO 8 Subwoofer |
c) 30 ea. Rubber Feet | d) 1 ea. 16 ft. RCA Cable |
x20 Small |
|
x10 Large |
|
e) 1 ea. Owner’s Manual
Note: After you unpack the DECO Home Theater System, locate the serial number on the back of one of the speakers, record it on page 20 of this manual and register
|
|
| ||
|
| |||
|
|
