Velodyne Acoustics DECO owner manual LOW-PASS Crossover

				80 Hz
		setting
	LOW-PASS
	CROSSOVER
		120 Hz		40 Hz
		SUBWOOFER
•	1200 WATTS DYNAMIC POWER	VOLUME
		MIN		MAX
•	600 WATTS RMS	POWER	ON	AUTO
•	HIGH-TEMP VOICE COIL			80 Hz
		setting
•	ULTRA-EFFICIENT E.R.S. CLASS D AMP	LOW-PASS
		CROSSOVER
•	ULTRA-LONG EXCURSION DRIVER	1 20 Hz		40 Hz
		INTERNAL		SUBWOOFER
	POWER
		X-OVER		DIRECT
	ON	PHASE	0 0	18 0 0

Figure 8. Suggested Knob Position for “LOW-PASS CROSSOVER” with DECO Satellites

Page-14

Figure 3C. Illustrates the “Omni-Mount” Wall Bracket (Model RST Series) installed into the ¼-20 threaded insert on the back of the DECO Satellite. Contact your local audio dealer to purchase Omni-Mount products.

Another option is the speaker stand by SANUS System. The location of the ¼-20 threaded insert on the back of the satellite will accommodate the use of the SANUS System “Euro Foundation Series” stand. Other speaker stand models may work, but Velodyne recommends the use of the “SANUS System” stand (see Figure 4).

Figure 4. Illustrates the “SANUS System” speaker stand (Euro Foundation Series) with the DECO Satellite installed. Contact your local audio dealer to purchase SANUS System products.

Page-7