Rear Panel Connections — Detailed Explanation

The SC-602 amplifier is equipped with both speaker-level and line-level inputs. Use the RCA/Phono type “INPUT” jacks when connecting from a pre-amp, signal processor, or line-level crossover. The “SPEAKER LEVEL INPUT” jacks connect directly to the speaker outputs of an integrated amplifier or receiver. Your amplifier section will notice no additional loading effects when you use these inputs because of their high impedance.

Note: Do not use both the RCA/Phono “INPUT” connections and “SPEAKER LEVEL INPUT” connections simultaneously.

ABOUT LOW - PASS CROSSOVERS

All of the SC-602 amplifier inputs sum the left and right channels together and the resulting signal is passed through an adjustable low-pass crossover before being amplified. The crossover control allows you to adjust the upper limit of the subwoofer’s frequency response from 30 to 160 Hz. The subwoofer’s response will begin rolling off above the frequency you set this control to. The slope is 24 dB/octave.

You should set the crossover frequency to obtain a smooth and seamless transition from the subwoofer to the main speakers in your system. If your main speakers are smaller units with limited low frequency output, you may wish to choose a higher frequency (such as 100-120 Hz) than you would with larger speakers which have greater low frequency output. The SC-602 amp’s crossover has a default of 80 Hz.

Most receivers and processors provide an option to characterize main speakers as “large” or “small” speakers. This will affect the speaker’s crossover point. We recommend in most cases setting the main speakers to “small,” despite their size and frequency response characteristics. This is because the powerful 400 (x2) watt SC-602 amp combined with the SC-600 subwoofer you have acquired are more likely suited to low bass reproduction than your amp and main speaker. With the burden of low frequency reproduction relieved, your speakers will exhibit better performance.

Disabling the Low - Pass Cr ossover (Subwoofer Dir ect)

Most multi-channel receiver/processors provide a crossover to the subwoofer (whereas most receivers do not). When using a multi-channel receiver, we suggest that you bypass /switch off the SC-602 amp’s low--pass crossover. To do this, depress the Crossover UP button until the

numeric LED shows indicating that the low-pass crossover has been defeated. To reactivate the low-pass crossover, simply push the crossover DOWN button to change to the desired frequency.

A WORD ABOUT YOUR RECEIVER’S CROSSOVER

AND THE SC - 602 AMPLIFIER CROSSOVER

Your Velodyne SC-602 amplifier is designed to operate using the full range audio signal for input when using the built-in crossover. Many home theater processors/receivers have a “subwoofer out” jack that performs this same function and are designed to be used with a powered subwoofer.

.w w w . v e l o d y n e . c o m

SC-602 Amplifier User’s Manual

9

Page 11 Page 13
Page 12
Image 12
Velodyne Acoustics SC-602 user manual Rear Panel Connections Detailed Explanation, About LOW Pass Crossovers
Page 11 Page 13

SC-602 specifications

The Velodyne Acoustics SC-602 is a standout subwoofer that exemplifies high-performance audio technology. Designed for audiophiles and home theater enthusiasts, the SC-602 delivers impressive low-frequency response, making it an ideal partner for any audio setup.

One of the main features of the SC-602 is its 6.5-inch driver, which is engineered to provide deep, hard-hitting bass that enhances the overall listening experience. The driver is made from high-quality materials, ensuring durability and longevity while delivering accurate sound reproduction. This subwoofer is capable of producing frequencies as low as 30 Hz, allowing for a full range of sound that fills the room with rich acoustic details.

The SC-602 incorporates Velodyne's advanced Digital Drive technology, which optimizes the performance of the subwoofer. This technology utilizes a proprietary digital signal processing (DSP) algorithm that fine-tunes the audio output for maximum efficiency and clarity. It allows the subwoofer to automatically adjust its output based on the acoustics of the room, ensuring that the bass is always well-balanced and powerful, regardless of the environment.

Another notable characteristic of the SC-602 is its elegant design. The subwoofer features a sleek and compact chassis, allowing it to blend seamlessly into any home décor. Its stylish finish not only enhances its aesthetic appeal but also ensures that the unit stands out as a premium audio component.

Connectivity is also a strong point for the SC-602. It comes equipped with various input options, including line-level and LFE inputs, allowing it to easily integrate with a wide range of audio systems. The built-in auto power on/off feature adds to its convenience, ensuring that the device uses minimal power when not in use.

Furthermore, the unit includes adjustable phase control and volume settings, enabling users to fine-tune their listening experience based on personal preferences and specific room dynamics. Overall, the Velodyne Acoustics SC-602 combines cutting-edge technology, sophisticated design, and user-friendly features to elevate any audio experience, making it a fantastic choice for those seeking to enhance their sound systems. Whether for movies, music, or gaming, this subwoofer truly delivers unparalleled performance.
Top Page Image Contents