Product Features
•8" (6.5" piston diameter) subwoofer with 2.5" high-temp voice coil and 107 ounce magnet/204 ounce motor structure; 10" (8" piston diameter) or 12" (9.7" piston diameter) subwoofer with 3" voice coil and 162 ounce magnet/346 ounce motor structure
•Built-in 2000 watts Dynamic/1000 watts RMS high efficiency class D amplifier
•Adjustable (40 to 120Hz) low-pass crossover (defeatable)
•Line-level (RCA) inputs and outputs
•Speaker-level inputs with 5 way binding post connections
•Signal sensing auto turn on/off (defeatable)
•Variable volume control
•Selectable phase control (0° or 180°)
•Frequency response of 28 - 120 Hz (SPL-800 Series II), 24 - 120Hz (SPL- 1000 Series II), 22-120Hz (SPL-1200 Series II)
•Magnetically shielded for video use (SPL-1000 Series II and SPL-1200 Series II)
•Multiple staggered low-pass crossovers; 12dB/octave initial, 48dB/ octave ultimate
•Driver Displacement Control circuit prevents over excursion and amp clipping
•Blue power indicator LED
•High-excursion EPDM rubber surround
•Oversized spider for linearity at high excursion
Prepare for Installation
Your new Velodyne subwoofer provides for a number of installation options. Read all the installation information below in order to determine which installation option is best for your system. Remember to perform
all installation procedures with system power turned off to prevent possible damage.
Placement
True subwoofers operate at extremely low frequencies which are primarily omni-directional. While it is recommended that the subwoofer be placed on the same plane as the satellite speakers, room and system conditions often dictate otherwise. Keep in mind that frequency response and output level can be drastically influenced by placement, depending on the acoustic properties of the listening room. Typically, the optimum location
continued. . .