SPECIFICATIONS

VA-1250X

Cabinet (incl. legs)

18" x 19" x 19" (W,H,D)

Frequency Response

22Hz. - 120Hz +/- 3 dB

High Pass Crossover

80Hz. or 100Hz (6 dB/octave)

Low Pass Crossover

40Hz. - 120Hz

 

(6 dB/octave, 24 dB ultimate)

Amplifier - Class A/B

250 watts, 750 watts peak

Woofer

12" forward firing

Magnet

70 oz.

Voice Coil

2-1/2"

Passive Radiator

15" downward firing

Inputs

Line-level & speaker-level

Outputs

Line-level & speaker-level

Warranty

Two years (parts & labor)

Weight

67 lbs. (approx.)

 

 

Specifications are subject to change without notice.

9

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lighting flash with arrowhead symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the subwoofer.

1.Read Instructions -- All safety and operating instructions should be read before the subwoofer is operated.

2.Retain Instructions -- The safety and operating instructions should be retained for future reference.

3.Heed Warnings -- All warnings on the subwoofer and in the operating instructions should be adhered to.

4.Follow Instructions -- All operating and use instructions should be followed.

5.Water and Moisture -- The subwoofer should not be used near water -- for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool or the like.

6.CartsandStands--Thesubwoofershouldbeusedonlywithacartorstandrecommendedbythemanufacturer.

7.Wall or Ceiling Mounting -- The subwoofer should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation -- The subwoofer should be situated so that its location or position does not interfere with its proper ventilation. For example, the subwoofer should not be situated on a bed, sofa, rug, or similar surface that may block theventilationopenings;orplacedinabuilt-ininstallationsuchasabookcaseorcabinetthatmayimpede the flow of air through the ventilation openings.

9.Heat -- The subwoofer should be situated away from heat sources such as radiators, heat registers, stoves, or other subwoofers that produce heat.

10.Power Sources -- The subwoofer should be connected to a power supply only of the type described in the operating instructions or as marked on the subwoofer.

11.Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the subwoofer.

12.Caution: To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.

13.Cleaning -- The subwoofer should be cleaned only as recommended by the manufacturer.

14.Nonuse Periods -- The power cord of the subwoofer should be unplugged from the outlet when left unused for

along period of time.

15.Object and Liquid Entry -- Care should be taken so that objects do not fall and liquids are not spilled onto the enclosure.

16.Damage Requiring Service -- The subwoofer should be serviced by qualified service personnel when:

a.The power-supply cord or plug has been damaged.

b.Objects have fallen or liquid has been spilled into the subwoofer.

c.The subwoofer has been exposed to rain.

d.The subwoofer does not appear to operate normally or exhibits a marked change in performance.

e.The subwoofer has been dropped or damaged.

17.Servicing -- The user should not attempt to service the subwoofer beyond what is described in the operating instructions.

18.Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Replacement parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

20.Safety Check - Upon completion of any service or service of repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

All other servicing should be referred to qualified service personnel.

Page 3
Image 3
Velodyne Acoustics VA-1250X owner manual Important Safety Instructions, Risk of Electric Shock Do not Open

VA-1250X specifications

Velodyne Acoustics has long been a pioneer in the world of audio technology, and their VA-1250X model exemplifies this legacy with a blend of innovative features and impressive performance. Designed for audiophiles and casual listeners alike, the VA-1250X provides an exceptional listening experience, making it a standout choice in the modern audio market.

One of the main features of the VA-1250X is its powerful Class D amplifier. With an output of 1250 watts peak power, this amplifier ensures that the sound produced is not only loud but also maintains clarity and detail across all frequencies. The efficient design of the Class D amplifier minimizes energy consumption while maximizing output, catering to both performance and environmental consciousness.

At the heart of the VA-1250X are Velodyne’s signature Advanced Digital Signal Processing (DSP) technologies. This sophisticated DSP works to optimize the audio signals, providing a clean and distortion-free sound even at high volume levels. This means that users can enjoy their favorite music, movies, or games without worrying about losing audio fidelity, even in challenging acoustic environments.

The VA-1250X also boasts a robust driver setup that includes a high-excursion composite cone woofer. This design allows for deeper bass response, providing a rich and immersive experience that is particularly noticeable in bass-heavy genres. The enclosure is engineered to reduce resonance, further ensuring that the sound remains pure and impactful.

Another key characteristic of the VA-1250X is its adjustable crossover frequency and phase control. This capability allows users to customize the audio output to better integrate with their existing speaker systems, catering to personal preferences and specific room acoustics. With multiple input options, including RCA and XLR connections, the VA-1250X is versatile enough to connect seamlessly with a variety of audio setups.

In summary, Velodyne Acoustics’ VA-1250X combines a powerful Class D amplifier, advanced digital signal processing, and a thoughtfully designed driver system to deliver an unparalleled audio experience. Its adaptability and performance make it an excellent choice for anyone looking to elevate their home audio system, whether for casual listening or critical sound reproduction. With the VA-1250X, Velodyne continues to push the boundaries of audio technology, promising satisfaction for enthusiasts and everyday users alike.