Velodyne Acoustics VLF-1012 owner manual Important Safety Instructions, Specifications, VLF-810

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lighting flash with arrowhead symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the subwoofer.

1.Read Instructions -- All safety and operating instructions should be read before the subwoofer is operated.

2.Retain Instructions -- The safety and operating instructions should be retained for future reference.

3.Heed Warnings -- All warnings on the subwoofer and in the operating instructions should be adhered to.

4.Follow Instructions -- All operating and use instructions should be followed.

5.WaterandMoisture--Thesubwoofershouldnotbeusednearwater -- forexample,nearabathtub,washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or the like.

6.CartsandStands --Thesubwoofershouldbeusedonlywithacartorstandrecommendedbythemanufacturer to avoid injury from tipover.

7.Wall or Ceiling Mounting -- The subwoofer should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation -- The subwoofer should be situated so that its location or position does not interfere with its proper ventilation. For example, the subwoofer should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat -- The subwoofer should be situated away from heat sources such as radiators, heat registers, stoves, or other subwoofers that produce heat.

10.Power Sources -- The subwoofer should be connected to a power supply only of the type described in the operating instructions or as marked on the subwoofer.

11.Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the subwoofer.

12.Caution: To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.

13.Cleaning -- The subwoofer should be cleaned only as recommended by the manufacturer.

14.Nonuse Periods -- The power cord of the subwoofer should be unplugged from the outlet when left unused for

along period of time.

15.Object and Liquid Entry -- Care should be taken so that objects do not fall and liquids are not spilled onto the enclosure.

16.Damage Requiring Service -- The subwoofer should be serviced by qualified service personnel when:

a.The power-supply cord or plug has been damaged.

b.Objects have fallen or liquid has been spilled into the subwoofer.

c. The subwoofer has been exposed to rain.

d.The subwoofer does not appear to operate normally or exhibits a marked change in performance.

e.The subwoofer has been dropped or damaged.

17.Servicing -- The user should not attempt to service the subwoofer beyond what is described in the operating instructions.

18.Overloading -- Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Replacementparts-- Whenreplacementpartsarerequired,besuretheservicetechnicianhasusedreplacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

20.Safety Check -- Upon completion of any service or service of repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

All other servicing should be referred to qualified service personnel.

SPECIFICATIONS	VLF-810	VLF-1012
Cabinet (H,W,D)	16-7/8" x 14-1/4" x 14-1/4"	19-1/2" x 16-7/8" x 17-1/2"
(including feet and grill)
Frequency Response	26Hz - 120Hz	24Hz - 120Hz
Harmonic Distortion	<5% (typical)	<5% (typical)
High Pass Crossover	80Hz (6 dB/octave)	80Hz (6 dB/octave)
Low Pass Crossover	40Hz - 120Hz	40Hz - 120Hz
	(12 dB/octave initial, 48 dB/octave ultimate)
Phase	0° /180°	0° /180°
Amplifier (Class D)	350 peak/	415 peak/
	125 watts RMS	150 watts RMS
Woofer (forward firing)	8" with 10" passive	10" with 12" passive
Magnetic Structure	90 oz. (5.6 lbs.)	95 oz. (5.9 lbs.)
Voice Coil	2" two-layer copper with	2" four-layer copper
	vented pole	with vented pole
Inputs	Line and Speaker	Line and Speaker
	Level	Level
Outputs	Line-level, 80Hz up	Line-level, 80Hz up
Warranty (parts & labor)	Two years	Two years
Weight (approx.)	50 lbs.	61 lbs.

Specifications are subject to change without notice.

FOR YOUR RECORDS. . .

DATE PURCHASED ____________________________________

DEALER__________________________________________________

SERIAL# _____________________________________________

* NOTE: Please complete and return your warranty card within ten (10) days.

11☞