Velodyne Acoustics VX-10 see , Page, ASPEAKER LEVEL INPUT terminals, CLINE INPUT jacks

Operational References

(see Figure 1, Page 8)

ASPEAKER LEVEL INPUT terminals

Connect these input terminals to the speaker output terminals of your amplifier or receiver.

BSPEAKER LEVEL OUTPUTterminals

The speaker-level signal to the front speakers is output from these terminals.

CLINE INPUT jacks

Connect these jacks to the LINE OUT jacks of the amplifier.

1LOW-PASS CROSSOVER

Use this knob to select the high-frequency range at which you wish to cut-off the signal to the subwoofer.

2Power indicator

Red: Unit is in standby mode.

Green: Unit is in operation mode.

(automatically turns to STANDBY mode if no signal for 8 min.)

3PHASE switch

Select the switch position at which you hear a louder bass sound.

4VOLUMELEVELknob

Use this knob to adjust the output level of the subwoofer.

5POWER switch (230V model only)

Main power switch. This switch should be turned in the off position when the subwoofer is not being used for extended periods of idle time to extend the life of the subwoofer..

9☞