Veo Pan and Tilt manual System ID, Camera Name, Default frame rate, Remote camera control, Log

Network Camera User’s Guide

System: Define Frame Rate and Turn on/off “Remote camera control”

System ID:

It’s a unique number for each Network Camera for identification.

Camera Name:

You can enter the name of this unit here. It’s very useful to identify the specific device from multiple units. Note that use “_” or “-“ to replace “space” character to separate the name string. For example, “PT_IP” or “PT-IP” will be ok and “PT IP” will not work here.

Default frame rate:

You can set up frame rate here or via right-side control panel.

For example, set the frame rate to 5 FPS, then the image will be updated for 5 frames per second, the time interval can be checked by the time displayed on the image.

Remote camera control:

Turn on “Remote camera control”: users will be able to use right-side control panel vice versa.

Log:

26/95