Important Safety Instructions
Thank you for purchasing the Verilux HappyEyes Floor Lamp. Please read the following safety information before using.
Unpacking Your Lamp
1. Remove all pieces from box. |
Locate 2 screws and tightening tool. |
2. Detach red plastic pieces and store |
General Precautions
•This portable lamp has
a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord or adapter unless plug can be fully inserted. Do not attempt
to defeat this safety feature.
•Before plugging in the Verilux HappyEyes Floor Lamp, check to make sure the voltage corresponds with the main voltage of your location
(120 volts).
•Do not use the HappyEyes Floor Lamp outside or in wet locations such as bathrooms. It is intended for indoor, dry use only.
•Not for use with light dimmers, timers, or motion detectors.
•This product may cause interference with radios, cordless telephones, or devices that use a wireless remote control, such as televisions.
If interference occurs, move
the product away from the device, plug the product or device into a different outlet, or move the lamp out of the line of sight of the remote control receiver. This lamp complies with part 18 of FCC.
•The light bulb may become loose during transit. To reinstall the light bulb, see the bulb replacement instructions.
•The HappyEyes Floor Lamp is an electrical device.
DO NOT USE NEAR WATER
them in the event you need to |
return the lamp. |
3. Important: To avoid scratching |
the metal shaft, do not use a sharp |
object to cut the plastic covering. |
The clear plastic covering on the |
shaft is specially designed to tear |
away easily. |
IMPORTANT NOTE:
Remove red plastic protective pieces prior to assembly.
3 | 4 |
