Setting and Using SLEEP SET continued
The Brightness Control on the front panel controls the initial brightness of the LED light panel and also controls the initial brightness of an external lamp, which can be plugged into the rear panel. Both the LED light panel and external lamp dim in accord.
Use of the LED light panel and an external lamp are optional. You can choose to have no light, LED light only, external lamp only or both LED and external lamp light.
For the Sleep Cycle, only the white LEDs are lit, then dimmed. The blue LEDs are used only in the Wake Cycle.
Change the Sleep Cycle initial brightness by using the Brightness Control on the front panel before or after you’ve made your menu settings. When the Sleep Cycle begins – when you press the SLEEP Button – the initial brightness used is the current Brightness Control setting.
1.Use the Rotary Selector Control to highlight LIGHT: TOP AND LAMP.
2.Press the Selector Button.
3.From the SLEEP LIGHT
4.Press the Selector Button to choose the highlighted selection.
The display returns to the SLEEP SETTINGS menu.
Backlight Settings
The BACKLIGHT Setting determines whether the display backlight is on or off after the Sleep Cycle completes. If you’d like no display light whatsoever after the Sleep Cycle ends, select OFF.
1.Use the Rotary Selector Control to highlight BACKLIGHT: OFF.
2.Press the Selector Button.
3.From the
4.Press the Selector Button to choose the highlighted selection.
The display returns to the SLEEP SETTINGS menu.
Sound Settings
1.Use the Rotary Selector Control to highlight SOUND: NONE.
2.Press the Selector Button.
3.From the SLEEP SOUND
17
VA04_Man_Rev9.indd 17
Job#: 0.0??? | Title: VA04 Manual |
Date: 11/04/09 | Version: |
11/4/09 1:38 PM
