Assembly Instructions
READ INSTRUCTIONS CAREFULLY BEFORE SET-UP
1.Remove lamp from box and packaging. Note: Please save original packaging for repacking should you need to return the product.
2.There are three mounting options:
Wall Mount: Using #6 screws (not included) secure the clamp to the wall and then insert the pin into the hole of the clamp. (Fig. 1)
Horizontal & Vertical Surface Mount: Remove clamp and turn the clamp screw counterclockwise until it is open slightly wider than the work surface to which you are attaching it. Clamp fits surfaces up to 1.75" thick. Surface must be a minimum of 1.5" deep for clamp to hold securely. (Figs. 2 & 3)
3.Slide the clamp onto work surface, and turn plastic clamp screw clockwise to tighten securely.
4.Place lamp shaft into clamp assembly and turn tightening knob clockwise to secure.
5.Adjust upper and lower goosenecks as needed to illuminate work surface.
6.Plug lamp into outlet and turn on; if bulb does not illuminate instantly, please refer to the troubleshooting section of this manual.
Care & Cleaning
Your Natural Spectrum® ShopLight™ is made from high quality materials that will last for many years with a minimum of care. You may want to periodically clean the lamp, using a mild
DO NOT USE SOLVENTS OR CLEANERS CONTAINING ABRASIVES, OR AMMONIA BASED CLEANERS
All moisture should be properly wiped away and dried prior to restoring power.
4
