ASSEMBLY INSTRUCTIONS
Read Instructions Carefully Before Assembly:
1.Remove lamp from box and packaging. Remove
red plastic protective pieces from lamp shaft. NOTE: Please save original packaging for repacking should you need to return the product.
2. Set lamp base on the floor and insert 
the lamp shaft over the base support 
part until the screw holes line up as 
shown in Fig.1. Insert the screw using 
the tightening tool and turn clockwise to 
tighten. We recommend assembling the base first before lamp head.
3.Attach the lamp head gooseneck to the shaft, tucking the wire into the shaft, until the screw holes line up as shown in Fig.1. Insert the screw using the tightening tool and turn clockwise to tighten. Should you have difficulty lining up the base or head screw holes, refer to the troubleshooting section of this manual.
in the lamp base
6
