Assembly Instructions
1.Set the lamp base on the floor and insert the lamp shaft over the base support unit until the screw holes line up as shown in Fig. 1. Insert the screw using the tightening tool and turn clockwise to tighten.
the lamp base
Fig. 1
2.Hold the upper shaft with one hand and release the ergonomic height adjustment lever by gently pulling it upward as shown in Fig. 2. Extend the upper shaft approximately
12". Lock the adjustment lever by gently pushing it downward. Once assembly instructions are complete, raise or lower the upper shaft to the desired height by releasing and locking the height adjustment lever.
Fig. 2
7
