Assembly Instructions — continued
3.Attach the lamp head gooseneck to the shaft until the screw holes line up as
shown in Fig. 3. Use care when tucking the wire into the shaft. Form a loop with any excess wire prior to tucking it. Insert the screw using the tightening tool and turn clockwise to tighten.
the lamp head
Fig. 3
4.Remove the light diffuser from the protective plastic bag. Insert the plastic pegs at the
bottom of the light diffuser into the openings near the bulb socket. Snap the tab
into place as shown in Fig. 4.
Note: Be sure all |
| |
styrofoam packing |
| |
is removed from the bulb |
| |
area prior to installing the | Fig. 4 | |
light diffuser. | ||
|
8