Verilux VH01 manual Sanitizing Wand Operation, Charging the Wand, Low Battery Indication, Timer

Sanitizing Wand Initial Set-up — continued

Charging the Wand

It takes approximately 14 hours to fully charge the battery for the first time.

• Connect the power adapter to the Wand.

• Plug the power adapter into a 110V grounded electrical outlet.

•The status LED light is RED when the Wand is charging.

•The status LED light is GREEN when the Wand is fully charged or in use.

•After the first full charge, typical charging time is 8 hours under normal use. The Wand can be used for up to 1 hour when fully charged.

CAUTION: Only the wand adapter provided with the device should be used.

Low Battery Indication

When the battery is low and requires charging, the Wand will beep 10 times and the red LED will flash 10 times.

LED Indicator Status

•Flashing Red – the Wand needs to be recharged.

•Red – the Wand is charging.

•Green – the Wand is fully charged or the Wand is on.

Sanitizing Wand Operation

Timer

During operation, a count-up timer shows total sanitizing time. The display increments each second to 59, then briefly displays the minutes elapsed before starting another 59-second count-up. The next minute reached is then shown briefly and the count-up begins again.

This cycle repeats for 99 minutes or until the Wand requires charging.

To see the current minute of sanitizing time, quickly press and release the blue button.

10

		Timer
P		s
r
e		in
s		rM
	s
		Buttonfo
		To Start,
	Press Until
		Beep