Verilux VH01 manual Sanitizing Wand Bulb Replacement, Sanitizing Wand Operation - continued

Sanitizing Wand Operation — continued

5.Move the Wand to next 12" (1 foot) area and continue sanitizing.

6.Repeat until you have completely sanitized your desired surface area.

7.When you have finished, press the blue button for three seconds. The Wand will turn off.

NOTE: Be sure the Wand is facing downward, directly over your desired sanitizing area. A safety switch will automatically turn off the UV-C light if the Wand is tilted upward from the horizontal position (the counter will not stop during this temporary bulb safety shut-off).

When the battery charge is low, the Wand will begin to beep and the red indicator light will flash, indicating that the battery needs to be charged.

Using the Wand in Charging Mode

The Wand can be used in charging mode simply by connecting the power adapter to the Wand and following the Operation Instructions.

Sanitizing Wand Bulb Replacement

Even with regular use, it is unlikely that you’ll ever need to replace the long-life Verilux® bulb. If you do need to replace a bulb, use only Verilux bulbs. Use of a non-Verilux bulb can result in damage to the Wand or the bulb.

To order a replacement bulb, use the Component Re-order form included with this product. Or call Verilux Customer Service at 1-800-786-6850 or visit www.verilux.com.

12