Bulb & Diffuser installation
1.Insert bulb into lamp by fi rmly holding bulb base and pushing down and rotating slightly in a clockwise direction to seat properly (See below)
Note: Make sure bulb is fully inserted into the socket. The bottom of the bulb base should touch the plastic housing of the lamp.
2.Attach the plastic diffuser to the lamp body by fi rst inserting the tab located at the bottom of the diffuser (A) into the opening of the lamp base (B).
3.Rotate the plastic diffuser and align the side snap tabs (C) into position – press fi rmly to snap parts together.
Note: When fi rst illuminated, bulb will need to “age” for about 10 minutes in order to attain its proper brightness and color
C
A
B
6
