Verilux VTCP01 Operation, Selecting a Location, Warning Do Not Block Vents, Instructions for Use

Models: VTCP01

1 12
Download 12 pages 24.68 Kb
Page 6
Image 6
Operation

Operation

Selecting a Location

Place your Verilux® HappyLight® Compact Energy Lamps on a table or other flat surface.

For best performance, place the HappyLight as close as 6 inches, but within 18 inches from your face.

Note: Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat-radiating products such as heaters. Do not place the lamp on the top of appliances that radiate heat.

WARNING: DO NOT BLOCK VENTS

Vents are necessary for proper function of the electronic ballast; blocking them may cause overheating of the electronics and increase risk of fire.

Instructions for Use

Use consists of sitting close to the HappyLight® Compact Energy Lamp with your eyes open. While staying oriented toward the light, feel free to engage in other activities such as reading, writing, hobbies and crafts, sewing, needlepoint, applying make-up, painting or working at your computer or desk.

1.Turn on the lamp and allow a few

minutes for the bulb to achieve full brightness.

2.The HappyLight Compact Energy

Lamp should be positioned as close as 6 inches, but within 18 inches from your face, and should be slightly offset from center (see diagram). Note: It is not necessary to stare directly at the light.

The light from the HappyLight Compact Energy Lamp must be directed at your eyes; therefore, your eyes must be open to achieve the full benefit. Note: Tinted glasses reduce the amount of light reaching your eyes.

When you are feeling sluggish and lethargic, spend more time with the light, sit closer to the light or add more lighting devices to increase the intensity. If you experience edginess, or are over stimulated, move the light further away or reduce usage time.

6

Page 6
Image 6
Verilux VTCP01 manual Operation, Selecting a Location, Warning Do Not Block Vents, Instructions for Use