Verizon GT704WG user manual Cmd

Wireless DSL Gateway User Manual

text box. When the list appears, click on the proper Ethernet adapter.

In the fields below, the Ethernet adapter’s various addresses appear. There should be an entry for IP address, Subnet Mask, and Default Gateway. Additionally, the “IP Address” entry should be on the 192.168.1.x network (with “x” defining a range from 2 though 255).

If the Ethernet adapter is showing an incorrect IP address, click Release, which sets all values back to 0 (zero). Then, click Renew (this process may take a few seconds). The renewed IP address should be on the 192.168.1.x network.

If an error occurs, or the IP address renews with an address outside the 192.168.1.x network, contact the ISP immediately.

sIf running Windows 98 SE, Me, 2000, or XP, check the computer’s TCP/ IP settings. Select Start, Run, enter

CMD

in the “Open” text box, then press OK. A “DOS” window appears, with a blink- ing cursor (prompt). Enter

ipconfig

at the cursor, then press Enter on the keyboard.

The IP address of the Ethernet adapter should appear in the DOS window. Ensure the IP address in the 192.168.1.x network (with “x” defining a range from 2 though 255).

If the Ethernet adapter is showing an incorrect IP address, enter

ipconfig /release

at the cursor, then press Enter on the keyboard, which sets all values back to 0 (zero). Next, enter

ipconfig /renew

at the cursor, then press Enter on the keyboard (this process may take a few seconds). The renewed IP address should be on the 192.168.1.x network.

If an error occurs, or the IP address renews with an address outside the 192.168.1.x network, contact the ISP immediately

sEnsure the browser is not set to “Never dial a connection” and there are no previous LAN settings.

To check this, go to Start, Settings, Control Panel. In the Control Panel, double-click Internet Options. When the “Internet Properties” window appears, ensure that the “Never dial a connection” option is not activated, then click LAN Settings. When the “Local Area Network (LAN) Settings” window appears, ensure that no settings are activated. If there are settings activated, deactivate them.

sShutdown and restart the computer. After the computer restarts, unplug the power cord from the Gateway and plug it back in. When the lights glow solid green, try accessing the Internet.

68