Dutchwest Non-Catalytic Convection Heater

Assembly

Your convection heater requires some assembly. Follow the directions carefully and refer to the parts diagram at the back of this manual.

Unpack the Parts

Remove the bottom heat shield strapped to the top of the stove and all loose parts from the firebox and the ash pan. Check to make sure all the parts are included and intact. You should have received:

•1 fully assembled heater body

•1 bottom heat shield*

•4 legs

•1 ash pan

•1 ceramic handle assembly

•1 hardware bag, containing the following parts:

•(3) #10 x 1/2” sheet metal screws, (to attach the chimney connector to the flue collar)

•(1) 1/8” Allen wrench, (to tighten the door latch)

•(1) 5/32” Allen wrench, (to tighten the damper handle)

•(4) washers, (used with the leg bolts to attach legs to the stove)

•(1) door handle insert holder (for storing the ce- ramic handle assembly when it is not in use.)

•(4) 1/4-20 x 1” hex head screws, (to attach legs)

If any parts are missing or damaged, immediately notify your Dutchwest dealer for replacements. Do not install your stove without having all necessary parts or using damaged parts.

*A Bottom Heat Shield is required in many instal- lations. Refer to the floor protection information found in the Installation Section of this manual.

Attach the Legs and Heat Shield

NOTE: To avoid damaging the sheet metal compo- nents, do not place the stove on its back to install the legs. Follow the instructions below.

1.Remove the band that holds the stove to the pallet and remove the bottom heat shield that was posi- tioned on top of the stove. (Fig. 15)

2.Rotate the stove counterclockwise until the front left corner overhangs the pallet and the leg-mounting hole is accessible. (Fig. 16)

3.Remove and discard the (4) 1/4-20 x 3/8” hex head bolts that are in the leg holes on the bottom of the stove.

Bottom Heat Shield

ST813

Fig. 15 Remove bands holding stove to pallet and remove heat shield from to of stove.

Leg

 

Bolt

 

 

Handle Insert

 

Holder

 

ST814

Fig. 16

Rotate stove on pallet to expose front left corner.

4.In the hardware bag, locate the four legs, the door handle insert holder, (on this leg only, the door handle insert holder is used along with a washer),

(4) 1/4-20 x 1” leg bolts and four (4) washers.

5.Place the bolt through a washer and then the door handle insert holder and align the leg with the bolt hole in the bottom of the stove. Tighten securely.

30003850

11

Page 10 Page 12
Page 11
Image 11
Vermont Casting 2478CE manual Assembly, Unpack the Parts, Attach the Legs and Heat Shield
Page 10 Page 12

2478CE specifications

Vermont Castings 2478CE is a premier wood stove that exemplifies the perfect blend of traditional craftsmanship and modern efficiency. Designed for those who appreciate both aesthetic and functional qualities in home heating, this model is a standout in the Vermont Castings lineup.

One of the main features of the 2478CE is its impressive heating capacity. It can produce up to 75,000 BTUs, making it capable of warming spaces of up to 2,500 square feet. This robust output ensures that your home remains cozy even on the coldest winter nights, allowing for a warm and inviting atmosphere.

The stove is constructed from high-quality cast iron, which not only adds to its durability but also allows for superior heat retention. This means that the stove will continue to emit warmth long after the fire has burned down, providing extended comfort without the need for constant refueling.

Vermont Castings has equipped the 2478CE with advanced air management technology. The unique air wash system ensures a clean and efficient burn by directing air across the glass door. This feature keeps the viewing window clear, allowing users to enjoy the mesmerizing flames without the nuisance of soot buildup.

Moreover, the 2478CE utilizes secondary combustion technology, which helps to maximize efficiency and minimize emissions. This innovative system re-burns smoke and gases that would otherwise be released into the atmosphere, ensuring that more heat is extracted from the wood. As a result, the stove achieves an impressive efficiency rating of up to 82%.

Another notable characteristic of the Vermont Castings 2478CE is its traditional design, complete with intricate detailing and a large firebox. The firebox is designed to accommodate larger logs, allowing for longer burn times and reduced frequency of refueling. Additionally, the stove is available in various finishes to match any home decor style, from classic black to vibrant enamel colors.

For those looking to enhance their hearth experience, the 2478CE can be paired with a variety of optional accessories, such as a classic heat shield or a blower, further improving its performance and efficiency.

In conclusion, the Vermont Castings 2478CE represents an excellent choice for homeowners seeking a reliable, beautiful, and efficient wood stove. With its substantial heating capacity, advanced technologies, and timeless design, it promises to be a centerpiece of comfort in any home for years to come.
Top Page Image Contents