4.Install the left log by placing it on the sheet metal bracket behind the grate with the left end of the log, “the thicker end” touching the grate and the left end of the firebox. Lay the log into the recessed area on the left branch of the rear log. When the log is in place, it will rest on the left branch of the rear log toward the left side of the branch.
5.Loosely sprinkle the lava rocks directly on top of the burner just behind decorative grate. (Fig. 18) Do not place lava rocks toward back of burner. The lava rock is shipped inside the bag assembly.
Left Log | Right Log |
| |
Rear Log | LG223 |
|
Fig. 17 Install rear, left and right logs.
| LG224 |
Fig. 18 | UVS27 logs in place. |
20007068 | |
UVS27
Complete the Installation
1.Install the screen frame by sliding the hooks over the top front edge of the firebox and resting the bottom on the support brackets. If the catalyst has been in- stalled, place the glass front on the stove by resting the bottom edge of the frame on support brackets below the front opening of the firebox. Rotate the top edge of the assembly toward the firebox, and center it. Rotate the right and left cams towards the back of the firebox to secure glass frame in place.
2.Grasp the front plate by the window bars and lift into position engaging the two steel tabs behind the adjacent bosses in the side plates. (Fig. 19) Seat the front against the sides so the tabs at the bottom lip engage with the notches in the stove legs.
Engage steel tabs behind the cast iron bosses
Control Door |
Bottom Tabs engage notch in the leg.
ST112b
Fig. 19 Install the Front Plate. Your Front may look different from that shown.
On the Pinnacle, the front tabs will engage behind the notched cutouts in the base of either side plate. (Fig. 20)
When properly installed, the bottom of the front plate cannot be pulled away form the sides without lifting it.
NOTE: Be sure the control door can swing out. It should close against the steel tab stop.
If installing the optional warming shelf, you may find it easiest to attach it to the top plate before placing the top in position on the stove. Follow the instructions sup- plied with the kit.
13
