UVS27 Vent-Free Gas Heater

Assembly Procedures

Unpack the Stove

The UVS27 is shipped fully assembled on its back. Unpack the stove and carefully set it upright.

CAUTION

Porcelain enamelled surfaces are fragile. Handle porcelain enamelled castings tenderly. Familiarize yourself with the assembly steps before you begin and proceed with deliberation and care. If possible, have assistance available.

Place enamelled castings on a soft, cushioned sur- face until you are ready to assembly.

Avoid contact between the castings and other hard surfaces or objects.

Install Optional Fan Kit

1.Remove shroud assembly by loosening two (2) hex head bolts on lower inside of shroud. Lift shroud as- sembly up and away from stove.

2.Attach the fan to the rear shroud by engaging the upper flange of the fan skirt under the lower edge of the shroud and secure the skirt with the four screws and one star washer provided. (Figs. 4, 5)

Upper

Flange

ST344a

Fig. 4 Place upper flange behind lower edge of shroud.

ST345a

Fig. 5 Correct position of fan skirt installation.

3.Feed the snapstat wire lead up between the in- ner and outer rear shroud panels and secure the snapstat to the upper right side of the inner shroud. (Fig. 6)

4.Secure the snapstat wire harness to the shroud panel using the wire tie provided.

5.Replace shroud and tighten the two (2) hex head nuts on lower inside of shroud.

6.Route the rheostat control switch and wire forward under the stove. Use the wire tie to secure the fan and rheostat wire harnesses together to the tubing under the bottom heat shield.

7.Install the rheostat onto the bracket to the left of the valve. (Fig. 7)

 

 

ST346a

Fig. 6 Attach snapstat to inner shroud.

 

 

Retaining Nut

Rheostat

 

Control Knob

 

FK104

Fig. 7 Attach rheostat to bracket.

MOTOR

 

BLK

BLK

BLK

 

 

 

BLK

SNAPSTAT

 

WHT

WHT

GRN

ON/OFF

RHEOSTAT

 

 

ST236

Fig. 8 Fan wiring diagram.

20007068

9

Page 9
Image 9
Vermont Casting 4040 - 4046, 4090 - 4092, 4085 - 4087 manual Assembly Procedures, Unpack the Stove, Install Optional Fan Kit

4085 - 4087, 4030 - 4036, 4090 - 4092, 4040 - 4046 specifications

Vermont Casting gas fireplaces are renowned for their high-quality construction and elegant designs, making them popular choices among homeowners seeking both functionality and aesthetic appeal. The models 4030, 4036, 4040, 4046, 4085, 4087, 4090, and 4092 represent a range of offerings that showcase the brand’s commitment to craftsmanship and innovation.

The Vermont Casting 4030 and 4036 models are characterized by their compact size and traditional styling, making them a great fit for smaller spaces. Both models employ advanced gas-burning technologies, ensuring efficient heat output and reduced emissions. The clean line design enhances any interior, while the expansive glass door allows for a clear view of the flames, adding to the ambiance of the room.

The 4040 and 4046 models expand upon this foundation, catering to larger spaces without sacrificing efficiency. These fireplaces can be fitted with either natural gas or propane, providing flexibility based on the homeowner’s preferences. The 4046, with its increased BTU output, is particularly effective in heating larger areas, making it a reliable choice during colder months.

Moving on to the 4085 and 4087 models, they are designed with larger viewing areas and a modern aesthetic, which appeals to contemporary tastes. These models also incorporate Vermont Castings' Clean Burn technology, which maximizes heat generation while minimizing pollutants released into the air. This technology makes the 4085 and 4087 environmentally friendly choices for conscientious consumers.

Finally, the 4090 and 4092 models take versatility to another level, offering distinctive designs that can complement various decor styles. Both come equipped with customizable options, including different finishes and decorative fronts, allowing homeowners to tailor their fireplace to match their preferences. The inclusion of advanced electronic ignition systems makes these models user-friendly, ensuring a hassle-free experience when lighting and operating the fireplace.

In conclusion, the Vermont Casting fireplace models 4030, 4036, 4040, 4046, 4085, 4087, 4090, and 4092 exemplify a blend of tradition, innovation, and customization. Their features promote efficient heating and aesthetic appeal, making them desirable options for any home environment. Whether for cozy evenings or entertaining guests, these fireplaces promise to enhance the warmth and charm of any space.