FLAME ADJUSTMENT (RN/RP MODELS)
For units equipped with Hi/Lo valves, flame adjustment is accomplished by rotating the Hi/Lo adjustment knob located near the centre of the gas control. (Fig. 20a & b)
FLAME CHARACTERISTICS
It is important to periodically perform a visual check of the pilot and the burner flames. Compare them to the pictorials illustrated below (Fig. 22, 23). If any of the flames appear abnormal call a service person.
I
Turn
counterclockwise
to increase
flame height.
L
H
O
Turn clockwise
to lower
flame height.
Fig. 20a
3/8" - 1/2" |
SIT VALVE |
Turn |
|
| Turn clockwise | |
counterclockwise |
|
| ||
|
| to increase | ||
to decrease |
|
| ||
I | L | flame height. | ||
flame height. | ||||
| H | O |
|
Fig. 20b
PSE VALVE |
Fig. 22 |
A232 |
Fig. 23
- 11 -