Majestic Fireplaces® BR/BC Series

Installing Line For Gas Log

Hole in Outer Casing

Fireplace Top View

 

CFM Corporation fireplaces are designed to accept a 1/2 inch gas line for installation of an approved gas ap- pliance. (CFM Corporation manufactures a wide variety of gas logs for use in CFM Corporation fireplaces.)

Be sure to have the appliance installed in accordance with building codes.

Gas connection may enter from either left or right side of the fireplace.

Locate appropriate gas line in the outer casing of fire- place and remove insulation from gas line tube. (Fig. 27)

From inside the fireplace, locate the knockout on the firebrick -- be sure you are on the appropriate or "gas line" side of the fireplace. Using a flat bladed screw- driver or small chisel and hammer, carefully tap around the knockout until it loosens and falls out.

Install 1/2 inch certified gas pipe through opening. After gas pipe installation is complete, use insulation

 

1"

Gas Line

Min.

Tube

 

Ceramic

Knockout

1/2"

Hole in Outer

Casing

Supply Line

Repack Insulation

Ceramic Knock- out

(both sides)

FP560

that was removed from gas line tube to repack space around the pipe. Material should be inserted from outside of the fireplace and packed tightly to totally seal between the pipe and tube.

Note: Gas pipe should not come in contact with any wood structures until it has reached a point at least one (1) inch away from fireplace side.

NOTE: When installing an ANSI Z21.11.2 ventless ap- pliance, the finishing material used for the mantel must be rated at 250°F or greater.

BTU input of a gas appliance installed in fireplace should be rated less than 100,000 BTU/Hr.

Gas pipe installation is intended for connection to a decorative gas appliance only when (1.) incorporating an automatic shutoff device and (2.) complying with the Standard for Decorative Gas Appliances for Installa- tion in Vented Fireplaces (ANSI Z21.60) or CSA draft requirements for Gas-Fired Log Lighters for Woodburn- ing Fireplaces (Draft No. 4, August 1993).

Decorative gas appliance should be installed in accor- dance with the National Fuel Gas Code, ANSI Z223.1/ NFPA 54 (latest edition).

Fig. 27 Gas line access.

CAUTION: WHEN USING DECORATIVE GAS APPLIANCE, FLUE DAMPER MUST BE SET IN FULLY OPEN POSITION. IF YOU HAVE GLASS DOORS ON THE FIRE- PLACE, THEY MUST ALSO BE FULLY OPENED.

WARNING: DO NOT OPERATE AN UNVENTED GAS LOG SET IN THIS FIRE- PLACE WITH THE CHIMNEY REMOVED.

WARNING: WHEN INSTALLING AN UNVENTED GAS LOG SET, THE CFM CORPORATION MODEL AH3244BK OR AH3244PB 4" ADJUSTABLE HOOD MUST BE USED.

Only unvented gas log sets which have been found to comply with the Standard for Unvented Room Heaters, ANSI Z21.11.2, are to be installed in this fireplace.

18

7412944

Page 18
Image 18
Vermont Casting BC36, BR42, BC42, BR36 manual Installing Line For Gas Log, Gas line access

BC36, BC42, BR36, BR42 specifications

Vermont Castings is renowned for its high-quality, American-made gas stoves, particularly the BR36, BR42, BC42, and BC36 models. These gas-burning appliances are engineered to provide warmth and comfort while seamlessly blending into any home décor.

The BR36 is designed with versatility in mind, featuring a compact 36-inch size that makes it ideal for smaller spaces. It utilizes a 35,000 BTU burner that delivers impressive heat output, ensuring a cozy atmosphere year-round. The innovative burner technology provides direct venting options, ensuring efficient performance and minimal heat loss. The BR36 is further enhanced by Vermont Castings' unique premium cast iron construction, which radiates heat effectively for long-lasting warmth.

The BR42 offers a larger heating capacity, suitable for medium to larger rooms. With a 42-inch size, it boasts a BTU rating of up to 42,000, enabling it to warm expansive areas with ease. The advanced flame technology creates a realistic fire appearance while maintaining efficiency. This model also includes adjustable airflow settings, allowing users to customize the flame height and heat output according to preference.

The BC42 is a standout model that bridges the gap between modern aesthetics and traditional craftsmanship. With a contemporary design, it caters to homeowners who appreciate style without sacrificing efficiency. The BC42 maintains a high heat output with its efficient burner system, producing up to 35,000 BTUs. Its programmable thermostat provides convenience, allowing for precise temperature control and the ability to schedule heating times, making it user-friendly.

Finally, the BC36, like the other models, boasts outstanding features but in a more compact design. It is perfect for urban dwellers and those looking to optimize small living areas. The BC36 retains efficiency and style, providing up to 30,000 BTUs of heat output. This model also includes an easy-to-use control panel and a large viewing area that allows for excellent fire visibility, enhancing the ambiance of any room.

All four models feature Vermont Castings' commitment to sustainability, with many designs adhering to rigorous environmental standards and using clean-burning technology. These gas stoves are not only functional but also designed to enrich the home experience, proving that comfort and elegance can coexist effortlessly. With Vermont Castings' legacy of excellence, the BR36, BR42, BC42, and BC36 models are exceptional choices for anyone seeking reliable heating solutions.