DV36/39 STKP and

CBTK

Bay Front Kits

Installation Instructions

Please read these instructions before beginning assembly.

Caution

Porcelain enamel is fragile. The finish can be eas- ily damaged if castings are not handled carefully. Always place castings on a protective surface, such as a towel, blanket or carpet.

Carefully unpack the Front Face components and in- spect for damage. Report missing or damaged parts to your dealer immediately.

Kit Contents

Upper Grille Assy.

Base Grille Assy.

Window Assy.

Base Trim Piece

Hanger Brackets, 2

Knob Ext., Hi/Lo

Knob Ext., Philostat

Knob Ext., Piezo

Knob, Off/On Ext. SIT#916.188

Knob, HI/LO Ext., SIT#916.189

#10 x 1/2” sheet metal screws, 2

Ceramic Refractory, 2

You will need a Phillips screwdriver to install the front. The fireplace installation should be complete and in- spected. Any surround and trim assemblies should also be installed before setting the front face in position.

Installation

1.Remove the upper louvre section from the DV fire- box front.

2.Fasten the two top brackets at the existing holes in the upper inside lip of the firebox. Use the left hole on the left bracket and the right hole on the right bracket. (Fig. 1)

3.Place two (2) ceramic refractory pieces into window assembly. (Fig. 2) CAUTION: The ceramic refractory pieces are very fragile, handle with care!

 

Use the

Top Hanger

outermost

hole

Brackets

 

 

KT232

Fig. 1 Be sure that each of the steel brackets is securely at- tached to the fireplace frame.

4.Hang the window panel on the firebox front by en- gaging its upper rail over the back of the top of the firebox opening frame. (Fig. 2)

Remove the protective film from the brass trim sections, if applicable.

 

Upper Rail

Ceramic

 

Refractory

Ceramic

 

 

Refractory

 

KT233

Fig. 2 Cast window panel shown, Steel window mounts in the same manner.

5.The base trim piece is used to close a gap that might exist between the base grille and a lower hearth. Attach the trim section to the base grille by engaging the narrow flange to the clips on the underside of the base grille. (Fig. 3)

30000429 8/08 Rev. 4

Page 1
Image 1
Vermont Casting installation instructions DV36/39 Stkp, Cbtk, Bay Front Kits, Installation Instructions

DV36/39 specifications

Vermont Castings DV36/39 is a prominent model in the line of direct vent gas stoves, celebrated for its craftsmanship and innovative technology. This unit is designed to provide efficient heating while delivering striking aesthetics that can enhance any living space. The DV36 and DV39 models are offered in multiple stylish finishes and designs, allowing homeowners to choose a look that complements their home decor.

One of the standout features of the Vermont Castings DV36/39 is its remarkable efficiency. The unit is engineered with advanced combustion technology which maximizes heat output while minimizing emissions. This means that homeowners can enjoy the warm ambiance of a fire without worrying about excessive fuel consumption or pollution. With an impressive efficiency rating, these stoves are environmentally friendly, making them a popular choice among the eco-conscious.

The DV36/39 is equipped with a powerful heating capacity, capable of warming spaces up to 1,500 square feet. This makes it an ideal choice for larger living areas or as supplemental heat in colder climates. The unit features an adjustable flame height and heat settings, allowing users to customize their experience and control the atmosphere in their homes easily.

In addition to its heating capabilities, the Vermont Castings DV36/39 includes a direct vent system that simplifies installation and provides optimal safety. This system draws air from the outdoors for combustion while expelling exhaust directly outside. As a result, the stove does not compromise indoor air quality, which is a critical consideration for modern households.

Users will also appreciate the convenience features integrated into the DV36/39. The stove comes with an intuitive remote control option, allowing for easy operation from anywhere in the room. This enhances user experience by providing the ability to adjust settings without having to leave the comfort of a chair.

Another notable characteristic of the Vermont Castings DV36/39 is its aesthetic appeal. The stoves are available with various door options and window sizes, showcasing the beautiful fire and providing a cozy atmosphere. From traditional cast iron finishes to more contemporary designs, the DV36/39 can fit seamlessly into a range of interior designs.

Whether you are looking for a practical heating solution or a stunning focal point in your home, the Vermont Castings DV36/39 offers a blend of functionality, efficiency, and style that makes it a top choice in the gas stove market.