Cast Louvre Kit
Installation Instructions
Model: EWF36CLK
1/4 - 20 x 1/2” Phillips Round Head Screws
(4)
Hinge Cover (2) 
Thicker side toward the top for top installation
Thicker side toward the bottom for bottom installation
Basic Universal
(4)
CAR153
Please read these instructions before beginning the installation.
General Information
Install the louvre kit after all other fireplace installation work has been completed, thoroughly checked and tested for proper operation and installation require- ments.
Check Contents of Shipping Carton
Compare contents shown in Figure 1 with actual parts received. If any parts are missing or damaged, contact your local dealer before starting installation.
| Louvre Kit Parts: |
|
Basic universal (4) | 20006024 |
Hinge Cover (2) | 20005994 |
1/4 - 20 x 1/2” phillips round head screw (4) Instruction sheet
Tools required: phillips screwdriver, needlenose pliers
Install Basic Universal
1.Insert each basic universal into openings in fire- place. Be sure the damper tabs have engaged plate sheet steel flanges in openings. NOTE: The damper tabs always point down. (Fig. 2)
2.Before inserting upper right panel, push the damper handle in flush with face. Once the panel is in place, use needlenose pliers to pull damper handle out through lattice in panel.
3.Adjust the panels for a symmetric appearance.
Install Hinge Covers
1.Align hinge cover on outside of hinge with holes located in the hinge. (Fig. 3)
2.Attach hinge cover using screws provided.
MHSC
149 Cleveland Drive • Paris, Kentucky 40361
www.mhsc.com
Fig. 1 Carton contents. |
|
|
Rear View |
|
|
| Metal Flanges |
|
Basic Universal | Damper Tab |
|
(Always point down) |
| |
Side View | Upper Panel Orientation |
|
|
| |
| Lower Panel Orientation | KT400 |
Fig. 2 Place basic universal, making sure the damper tabs engage plate steel metal flanges of fireplace.
|
| Hinge |
| Screws | Hinge Cover |
|
| |
|
| Hinge cover |
|
| will cover this |
|
| area. |
|
| KT401 |
Fig. 3 | Install hinge cover. |
|
|
| 20006092 8/08 Rev. 4 |
