NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO START OR ‘FRESHEN UP’ A FIRE IN THIS HEATER. KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE HEATER WHILE IT IS IN USE.

GLASS CARE

REPLACE GLASS ONLY WITH HIGH TEMPERATURE ROBAX PYROCERAM OF THE PROPER SIZE AND THICKNESS

The following use and safety tips should be observed:

1.Inspect the glass regularly for cracks and breaks. If you detect a crack or break, extinguish the fire immediately, and contact your dealer for replacement.

2.Do not slam door or otherwise impact the glass. When closing doors, make sure that logs or other objects to not protrude and impact the glass.

3.Do not clean the glass with materials which may scratch (or otherwise damage) the glass. Scratches on the glass can develop into cracks or breaks.

4.Never attempt to clean the glass while unit is hot. If the deposit is not very heavy, nor mal glass cleaners are adequate with a plain, non-abrasive scouring pad. Heavier deposits may be removed with the use of a readily available oven cleaner.

5.Never put substances which can ignite explosively in the unit since even small explosions in confined areas can blow out the glass.

6.This unit has an airwash system, designed to reduce deposits on glass.

GASKET REPLACEMENT

After extensive use, the sealing material which provides glass and door seal may need to be replaced if it fails to sustain its resilience. Inspect glass and door seal periodically to ensure for proper seal. If gaskets become frayed or worn, replace immediately. Contact your dealer for approved replacement parts.

The following steps should be followed for glass gasket replacement:

1.Ensure appliance is not in operation and is thoroughly cooled.

2.Remove screw and glass clip (see insert sheet specific to your appliance).

3.Lift glass out from glass clip.

4.Remove old gasket and clean glass.

5.Replace new gasket starting at the bottom of glass working along edges, being sure to centre gasket channel on glass.

6.Trim to length and butt ends together.

7.Replace glass in door, being sure not to over-tighten screw and clip.

The following steps should be followed for door gasket replacement:

1.Ensure appliance is not in operation and is thoroughly cooled.

2.Remove old door gasket and clean channel.

3.Using an approved high temperature gasket cement, apply a thin coat in bottom of channel.

4.Starting at hinge side of door, work into channel around door unit, end butt and trim to length.

5.Close door and allow three to four hours for cement to set before restarting appliance.

9

Page 7 Page 9
Page 8
Image 8
Vermont Casting WOOD STOVE owner manual Glass Care, Gasket Replacement
Page 7 Page 9

WOOD STOVE specifications

Vermont Castings wood stoves have long been regarded as symbols of quality and craftsmanship in home heating solutions. With a reputation that spans decades, these stoves combine function, efficiency, and aesthetic appeal, making them a favorite among homeowners seeking an optimal balance between performance and design.

One of the standout features of Vermont Castings wood stoves is their exceptional heat efficiency. Many models incorporate Advanced Combustion Technology, which enhances burn characteristics to produce more heat while reducing the amount of wood consumed. This technology significantly lowers emissions, making the stoves not only environmentally friendly but also economically sensible; less wood burned means more savings on fuel costs.

The stoves are constructed from high-quality cast iron, renowned for its durability and ability to retain heat. This material distributes warmth evenly throughout the space, ensuring a comfortable environment while maintaining consistent temperatures long after the fire has died down. The heavy-duty design also offers remarkable longevity, allowing homeowners to invest in a long-lasting home heating solution.

In addition to their efficient operation, Vermont Castings wood stoves are designed with a classic aesthetic that complements various interior styles. Available in multiple colors and finishes, including timeless matte black and vibrant enamel options, these stoves make not only a practical addition to the home but also a statement piece. The intricate details and craftsmanship reflect a commitment to beauty alongside effectiveness.

Ease of use is another hallmark of Vermont Castings wood stoves. Many models include user-friendly features such as convenient loading doors, clean-out options, and adjustable air controls, enabling homeowners to manage their heat output with minimal effort. Furthermore, the inclusion of a large firebox allows for longer logs, reducing the frequency of reloading and enhancing the overall user experience.

To ensure safety and reliability, Vermont Castings incorporates modern engineering with traditional design. The stoves are rigorously tested to uphold stringent performance and safety standards, giving users peace of mind.

Overall, Vermont Castings wood stoves represent a harmonious blend of efficiency, design, and user-centered features, ensuring that homes remain warm and inviting throughout the colder months. Whether for primary heating or ambiance, these stoves are a worthwhile addition to any residence.
Top Page Image Contents