ADVANCED OPERATION
SCAN
The Scanning feature is used to monitor multiple channels programmed into the trans- ceiver. While scanning, the transceiver will check each channel for the presence of a signal, and will stop on a channel if a signal is present.
rPress the assigned PF button to activate scanning.
rThe scanner will search the channels of each channel, looking for active ones; it will pause each time it finds a channel on which someone is speaking.
rPress the assigned PF button again to disable scanning. Operation will revert to the programmed revert channel.
Note: Your dealer may have programmed your radio to stay on one of the following channels if you press the PTT switch during scanning pause:
¦“Last Busy” Channel
¦“Home” Channel
¦“Scan Start” Channel
¦Current channel (“Talk Back”)
¦“Priority channel”
SCAN A/D (ADD/DELETE)
rPress the assigned PF button to delete the current channel from Scanning. Alter- natively, press and hold the assigned PF button for 2 seconds to delete the current channel from Scanning.
rWhen you delete a channel, the “PRG ” icon will disappear on the LCD. To restore a particular channel to your scanning list, press and hold in the assigned PF button again for 2 seconds; the “PRG” icon will appear on the LCD.
DUAL WATCH
The Dual Watch feature is similar to the Scan feature, except that only two channels are monitored:
rThe current operating channel; and
rThe “Priority” channel.
To activate Dual Watch:mPress the assigned PF button.
mThe scanner will search the two channels; it will pause each time it finds a channel on which someone is speaking.
To stop Dual Watch:mPress the assigned PF button.
Page 9 |